PIC16F1937-I/P Microchip Technology, PIC16F1937-I/P Datasheet - Page 16

• Manufacturer Part Number: PIC16F1937-I/P
• Description: IC PIC MCU FLASH 512KX14 40-PDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1937-I/P

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART/MI2C/SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• A/d Bit Size: 10 bit
• A/d Channels Available: 14
• Height: 4.95 mm
• Length: 53.21 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Width: 14.73 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F193X/LF193X/PIC16F194X/LF194X/
REGISTER 3-3:
DS41397B-page 16
bit 13
bit 6
Legend:
R = Readable bit
-n = Value at POR
bit 13
bit 12
bit 11
bit 11
bit 10
bit 9
bit 8
bit 7-6
bit 5-4
bit 5
Note 1:
(4)
R/P-1
(5)
LVP
U-1
(1)
2:
3:
4:
5:
—
For PIC16F193X only.
For PIC16F194X only.
The LVP bit cannot be programmed to ‘0’ when Programming mode is entered via LVP.
Unemplemented on PIC16LF190X devices. This bit reads as ‘1’.
For PIC16LF190X only.
LVP: Low-Voltage Programming Enable bit
1 = Low-voltage programming enabled
0 = MCLR/V
DEBUG: In-Circuit Debugger Mode bit
1 = In-Circuit Debugger disabled, RB6/ICSPCLK and RB7/ICSPDAT are general purpose I/O pins
0 = In-Circuit Debugger enabled, RB6/ICSPCLK and RB7/ICSPDAT are dedicated to the debugger
Unimplemented: Read as ‘1’
ULPBOR: Ultra Low-Power BOR Enable bit
1 = Ultra low-power BOR is disabled
0 = Ultra low-power BOR is enabled
BORV: Brown-out Reset Voltage Selection bit
1 = Brown-out Reset voltage set to 1.9V
0 = Brown-out Reset voltage set to 2.7V
STVREN: Stack Overflow/Underflow Reset Enable bit
1 = Stack overflow or underflow will cause a Reset
0 = Stack overflow or underflow will not cause a Reset
PLLEN: PLL Enable bit
1 = 4xPLL enabled
0 = 4xPLL disabled
Unimplemented: Read as ‘1’
For the PIC16F1933/1934/1936/1937/1938/1939:
VCAPEN<1:0>
PIC16LF193x:
PIC16F193x:
Unimplemented: Read as ‘1’
VCAPEN1
DEBUG
00 =V
01 =V
10 =V
11 =All V
These bits are unimplemented. All V
R/P-1
R/P-1
CONFIGURATION WORD 2
CAP
CAP
CAP
(1)
PP
CAP
functionality is enabled on RA0
functionality is enabled on RA5
functionality is enabled on RA6
(1)
must be used for programming high voltage
W = Writable bit
‘1’ = Bit is set
: Voltage Regulator Capacitor Enable bits
pin functions are disabled
VCAPEN0
VCAPEN
R/P-1
R/P-1
—
(5)
(2)
(1)
BORV
R/P-1
U-1
—
CAP
(3)
pin functions are disabled.
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
STVREN
R/P-1
U-1
—
 2010 Microchip Technology Inc.
PLLEN
WRT1
R/P-1
R/P-1
WRT0
R/P-1
U-1
—
bit 7
bit 0