PIC18F46J50-I/ML Microchip Technology, PIC18F46J50-I/ML Datasheet - Page 281

• Manufacturer Part Number: PIC18F46J50-I/ML
• Description: IC PIC MCU FLASH 64KB 44-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-QFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Timers: 2
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44QFN EP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• A/d Bit Size: 10 bit
• A/d Channels Available: 13
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

EXAMPLE 18-2:
© 2009 Microchip Technology Inc.
;
;DestBuf
;
;SrcBuf
;
PrepareTransfer:
BeginXfer:
movlw
movwf
movlw
movwf
movlw
movwf
movlw
movwf
movlw
movwf
movlw
movwf
bsf
;Execute whatever
udata
res
res
HIGH(DestBuf)
RXADDRH
LOW(DestBuf)
RXADDRL
HIGH(SrcBuf)
TXADDRH
LOW(SrcBuf)
TXADDRL
0x01
DMABCH
0xFF
DMABCL
DMACON1, DMAEN
512-BYTE SPI MASTER MODE Init AND TRANSFER (CONTINUED)
0x500
0x200
0x200
;Somewhere else in our project, lets assume we have
;allocated some RAM for use as SPI receive and
;transmit buffers.
;Let’s reserve 0x500-0x6FF for use as our SPI
;receive data buffer in this example
;Lets reserve 0x700-0x8FF for use as our SPI
;transmit data buffer in this example
;Get high byte of DestBuf address (0x05)
;Load upper four bits of the RXADDR register
;Get low byte of the DestBuf address (0x00)
;Load lower eight bits of the RXADDR register
;Get high byte of SrcBuf address (0x07)
;Load upper four bits of the TXADDR register
;Get low byte of the SrcBuf address (0x00)
;Load lower eight bits of the TXADDR register
;Lets move 0x200 (512) bytes in one DMA xfer
;Load the upper two bits of DMABC register
;Actual bytes transferred is (DMABC + 1), so
;we load 0x01FF into DMABC to xfer 0x200 bytes
;The SPI DMA module will now begin transferring
;the data taken from SrcBuf, and will store
;received bytes into DestBuf.
;CPU is now free to do whatever it wants to
;and the DMA operation will continue without
;intervention, until it completes.
;When the transfer is complete, the SSP2IF flag in
;the PIR3 register will become set, and the DMAEN bit
;is automatically cleared by the hardware.
;The DestBuf (0x500-0x7FF) will contain the received
;data.
;to reinitialize RXADDR, TXADDR, DMABC and then
;set the DMAEN bit.
To start another transfer, firmware will need
PIC18F46J50 FAMILY
DS39931C-page 281