PIC18F46J50-I/ML Microchip Technology, PIC18F46J50-I/ML Datasheet - Page 382

• Manufacturer Part Number: PIC18F46J50-I/ML
• Description: IC PIC MCU FLASH 64KB 44-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J50-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-QFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Timers: 2
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44QFN EP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• A/d Bit Size: 10 bit
• A/d Channels Available: 13
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F46J50 FAMILY
22.2
A single comparator is shown in Figure 22-2, along with
the relationship between the analog input levels and
the digital output. When the analog input at V
than the analog input, V
tor is a digital low level. When the analog input at V
is greater than the analog input, V
comparator is a digital high level. The shaded areas of
the output of the comparator in Figure 22-2 represent
the uncertainty due to input offsets and response time.
FIGURE 22-2:
FIGURE 22-3:
DS39931C-page 382
V
V
Output
IN
IN
-
+
V
V
IN
IN
Comparator Operation
+
-
VA
R
S
Legend:
+
–
< 10k
SINGLE COMPARATOR
COMPARATOR ANALOG INPUT MODEL
IN
-, the output of the compara-
A
IN
C
V
I
R
R
VA
LEAKAGE
C
5 pF
PIN
T
IC
S
IN
PIN
-, the output of the
Output
= Input Capacitance
= Threshold Voltage
= Leakage Current at the pin due to various junctions
= Interconnect Resistance
= Source Impedance
= Analog Voltage
IN
+ is less
IN
V
+
DD
V
V
T
T
= 0.6V
= 0.6V
22.3
Response time is the minimum time, after selecting a
new reference voltage or input source, before the
comparator output has a valid level. The response time
of the comparator differs from the settling time of the
voltage reference. Therefore, both of these times must
be considered when determining the total response to
a comparator input change. Otherwise, the maximum
delay of the comparators should be used (see
Section 29.0 “Electrical Characteristics”).
22.4
Figure 22-3 provides a simplified circuit for an analog
input. Since the analog pins are connected to a digital
output, they have reverse biased diodes to V
V
and V
by more than 0.6V in either direction, one of the diodes
is forward biased and a latch-up condition may occur.
A maximum source impedance of 10 kΩ is
recommended for the analog sources. Any external
component connected to an analog input pin, such as
a capacitor or a Zener diode, should have very little
leakage current.
SS
. The analog input, therefore, must be between V
DD
. If the input voltage deviates from this range
Comparator
Analog Input Connection
Considerations
I
±100 nA
V
LEAKAGE
SS
R
IC
© 2009 Microchip Technology Inc.
Response Time
Comparator
Input
DD
and
SS