DSPIC30F3014-30I/ML Microchip Technology, DSPIC30F3014-30I/ML Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F3014-30I/ML
• Description: IC DSPIC MCU/DSP 24K 44QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F3014-30I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 24KB (8K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• For Use With: XLT44QFN2 - SOCKET TRAN ICE 44QFN/40DIPAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F301430IML

High-Performance Modified RISC CPU:
• Modified Harvard Architecture
• C Compiler Optimized Instruction Set Architecture
• Flexible Addressing modes
• 83 Base Instructions
• 24-Bit Wide Instructions, 16-Bit Wide Data Path
• Up to 48 Kbytes On-Chip Flash Program Space
• 2 Kbytes of On-Chip Data RAM
• 1 Kbyte of Nonvolatile Data EEPROM
• 16 x 16-Bit Working Register Array
• Up to 30 MIPS Operation:
• Up to 33 Interrupt Sources:
DSP Features:
• Dual Data Fetch
• Modulo and Bit-Reversed modes
• Two 40-Bit Wide Accumulators with Optional
• 17-Bit x 17-Bit Single-Cycle Hardware
• All DSP Instructions are Single Cycle
• Single-Cycle ±16 Shift
 2010 Microchip Technology Inc.
Note:
- DC to 40 MHz External Clock Input
- 4 MHz-10 MHz Oscillator Input with
- 8 user-selectable priority levels
- 3 external interrupt sources
- 4 processor traps
saturation Logic
Fractional/Integer Multiplier
- Multiply-Accumulate (MAC) Operation
PLL Active (4x, 8x, 16x)
High-Performance, 16-Bit Digital Signal Controllers
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046). For more information on the
device instruction set and programming,
refer to the “16-bit MCU and DSC Pro-
grammer’s
(DS70157).
Reference
dsPIC30F3014/4013
Manual”
Peripheral Features:
• High-Current Sink/Source I/O Pins: 25 mA/25 mA
• Up to Five 16-Bit Timers/Counters; Optionally Pair
• Up to Four 16-Bit Capture Input Functions
• Up to Four 16-Bit Compare/PWM Output Functions
• Data Converter Interface (DCI) Supports Common
• 3-Wire SPI module (supports 4 Frame modes)
• I
• Up to Two Addressable UART modules with FIFO
• CAN bus module Compliant with CAN 2.0B
Analog Features:
• 12-Bit Analog-to-Digital Converter (ADC) with:
• Programmable Low-Voltage Detection (PLVD)
• Programmable Brown-out Reset
Special Microcontroller Features:
• Enhanced Flash Program Memory:
• Data EEPROM Memory:
• Self-Reprogrammable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with On-Chip
• Fail-Safe Clock Monitor Operation:
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
Up
16-Bit Timers into 32-Bit Timer modules
Audio Codec Protocols, Including I
and 7-Bit/10-Bit Addressing
Buffers
Standard
- 200 ksps conversion rate
- Up to 13 input channels
- Conversion available during Sleep and Idle
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
Low-Power RC Oscillator for Reliable Operation
- Detects clock failure and switches to on-chip
- Sleep, Idle and Alternate Clock modes
2
C™ module Supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low-power RC oscillator
2
S and AC’97
DS70138G-page 3