PIC24HJ128GP206-I/PT Microchip Technology, PIC24HJ128GP206-I/PT Datasheet - Page 127

• Manufacturer Part Number: PIC24HJ128GP206-I/PT
• Description: IC PIC MCU FLASH 64KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP206-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (43K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: CAN/I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 13
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 18-ch x 12-bit
• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 8KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM300019 - BOARD DEMO DSPICDEM 80L STARTERDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

8.0
The PIC24H oscillator system provides:
• Various external and internal oscillator options as
• An on-chip PLL to scale the internal operating
FIGURE 8-1:
© 2006 Microchip Technology Inc.
Note:
clock sources
frequency to the required system clock frequency
SOSCO
SOSCI
OSC2
OSC1
OSCILLATOR
CONFIGURATION
This data sheet summarizes the features
of this group of PIC24H devices. It is not
intended to be a comprehensive reference
source. To complement the information in
this data sheet, refer to the “dsPIC30F
Family Reference Manual” (DS70046).
Secondary Oscillator
Primary Oscillator
Oscillator
Oscillator
LPRC
FRC
PIC24H OSCILLATOR SYSTEM DIAGRAM
SOSCEN
Enable
Oscillator
PLL
FRCDIV<2:0>
Preliminary
PIC24H
• The internal FRC oscillator can also be used with
• Clock switching between various clock sources
• Programmable clock postscaler for system power
• A Fail-Safe Clock Monitor (FSCM) that detects
• A Clock Control register (OSCCON)
• Nonvolatile Configuration bits for main oscillator
A simplified diagram of the oscillator system is shown
in Figure 8-1.
ECPLL, FRCPLL
the PLL, thereby allowing full-speed operation
without any external clock generation hardware
savings
clock failure and takes fail-safe measures
selection.
XTPLL, HSPLL,
XT, HS, EC
SOSC
LPRC
FRC
Clock Control Logic
Fail-Safe
Monitor
Clock
DOZE<2:0>
WDT, PWRT
Clock Source Option
for other Modules
PIC24H
DS70175C-page 125
Peripherals
CPU