DSPIC30F4013-20I/P Microchip Technology, DSPIC30F4013-20I/P Datasheet - Page 217

• Manufacturer Part Number: DSPIC30F4013-20I/P
• Description: IC DSPIC MCU/DSP 48K 40DIP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F4013-20I/P

• Program Memory Type: FLASH
• Program Memory Size: 48KB (16K x 24)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
• Number Of I /o: 30
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 30
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM300018, DM330011
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC30F003 - MODULE SOCKET DSPIC30F 40DIPACICE0206 - ADAPTER MPLABICE 40P 600 MIL
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F4013-20IP

APPENDIX A:
Revision D (June 2006)
Previous versions of this data sheet contained
Advance or Preliminary Information. They were
distributed with incomplete characterization data.
This revision reflects these changes:
• Revised I
• Updated example for ADC Conversion Clock
• Base instruction CP1 eliminated from instruction
• Revised electrical characteristics:
Revision E (January 2007)
This revision includes updates to the packaging
diagrams.
Revision F (April 2008)
This revision reflects these updates:
• Added FUSE Configuration Register (FICD)
• Added Note 2 in Device Configuration Registers
• Removed erroneous statement regarding genera-
• Updated ADC Conversion Clock and Sampling
• Updated details related to the Input Change
 2010 Microchip Technology Inc.
(see
selection (see
Digital Converter (ADC)
set
- Operating Current (I
- Idle Current (I
- Power-down Current (I
- I/O pin Input Specifications
- Brown Out Reset (BOR) Specifications
- Watchdog Timer time-out limits
details (see
Registers”
table
tion of CAN receive errors (see
“Receive
Rate Calculation (see
T
Notification module:
- Updated last sentence in the first paragraph
- Updated
- Removed Table 7-3, Table 7-4, and Table 7-5
AD
(see
(see
(see
(see
(see
(see
of
Module”
(seeTable
is 334 nsec.
Section 7.3 “Input Change Notification
Table
(Table
Table
Table
Table
Table
Table
Table
2
C Slave Addresses
Errors”)
14-1)
Table 7-2
Section 20.8 “Device Configuration
and
20-8)
23-20)
23-5)
23-6)
23-7)
23-8)
23-11)
21-2)
Section 19.0 “12-bit Analog-to-
IDLE
Table
) Specifications
REVISION HISTORY
Example
DD
20-8)
) Specifications
PD
Module”)
) Specifications
Section 17.4.5
19-1). Minimum
• Electrical Specifications:
• Additional minor corrections throughout the
- Resolved TBD values for parameters DO10,
- 10-bit High-Speed ADC t
- Parameter OS65 (Internal RC Accuracy) has
- Parameter DC12 (RAM Data Retention Volt-
- Parameter D134 (Erase/Write Cycle Time)
- Removed parameters OS62 (Internal FRC
- Parameter OS63 (Internal FRC Accuracy)
- Removed parameters DC27a, DC27b,
- Removed parameters CS77 and CS78
- Updated Min and Max values and Conditions
document
dsPIC30F3014/4013
DO16, DO20, and DO26 (see
ter (time to stabilize) has been updated from
20 µs typical to 20 µs maximum (see
Table
been expanded to reflect multiple Min and
Max values for different temperatures (see
Table
age) has been updated to include a Min value
(see
has been updated to include Min and Max
values and the Typ value has been removed
(see
Jitter) and OS64 (Internal FRC Drift) and
Note 2 from AC Characteristics (see
Table
has been expanded to reflect multiple Min
and Max values for different temperatures
(see
DC47a, and DC47b (references to I
20 MIPs @ 3.3V) in
Table 23-6
(references to T
Table 23-29
for parameter SY11 and updated Min, Typ,
and Max values and Conditions for
parameter SY20 (see
Table
Table
Table
23-38)
23-18)
23-17)
23-4)
23-12)
23-17)
RACL
Table 23-5
and T
Table
PDU
FACL
23-20)
timing parame-
Table
DS70138G-page 217
and
@ 3.3V) in
DD
23-9)
,