PIC24HJ64GP510-I/PF Microchip Technology, PIC24HJ64GP510-I/PF Datasheet - Page 114

IC PIC MCU FLASH 32KX16 100TQFP

PIC24HJ64GP510-I/PF

Manufacturer Part Number
PIC24HJ64GP510-I/PF
Description
IC PIC MCU FLASH 32KX16 100TQFP
Manufacturer
Microchip Technology
Series
PIC® 24Hr

Specifications of PIC24HJ64GP510-I/PF

Core Size
16-Bit
Program Memory Size
64KB (22K x 24)
Core Processor
PIC
Speed
40 MIPs
Connectivity
CAN, I²C, IrDA, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number Of I /o
85
Program Memory Type
FLASH
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 32x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
100-TQFP, 100-VQFP
Controller Family/series
PIC24
No. Of I/o's
85
Ram Memory Size
8KB
Cpu Speed
40MIPS
No. Of Timers
13
No. Of Pwm Channels
8
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164323 - MODULE SKT FOR 100TQFP
Eeprom Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC24HJ64GP510-I/PF
Manufacturer:
Microchip
Quantity:
602
Part Number:
PIC24HJ64GP510-I/PF
Manufacturer:
Microchip Technology
Quantity:
10 000
PIC24H
FIGURE 7-1:
7.1
Each DMAC Channel x (x = 0, 1, 2, 3, 4, 5, 6 or 7)
contains the following registers:
• A 16-bit DMA Channel Control register
• A 16-bit DMA Channel IRQ Select register
• A 16-bit DMA RAM Primary Start Address register
• A 16-bit DMA RAM Secondary Start Address
• A 16-bit DMA Peripheral Address register
• A 10-bit DMA Transfer Count register (DMAxCNT)
An additional status register, DMACS, is common to all
DMAC channels. It contains the DMA RAM and SFR
write
respectively.
The
DMAxCNT are all conventional read/write registers.
Reads of DMAxSTA or DMAxSTB will read the con-
tents of the DMA RAM Address register. Writes to
DMAxSTA or DMAxSTB write to the registers. This
allows the user to determine the DMA buffer pointer
value (address) at any time.
The interrupt flags (DMAxIF) are located in an IFSx
register in the interrupt controller. The corresponding
interrupt enable control bits (DMAxIE) are located in
an IECx register in the interrupt controller, and the cor-
responding interrupt priority control bits (DMAxIP) are
located in an IPCx register in the interrupt controller.
DS70175C-page 112
(DMAxCON)
(DMAxREQ)
(DMAxSTA)
register (DMAxSTB)
(DMAxPAD)
Note: CPU and DMA address buses are not shown for clarity.
SRAM
DMAxCON,
collision
DMAC Registers
SRAM X-Bus
CPU
flags,
DMAxREQ,
TOP LEVEL SYSTEM ARCHITECTURE USING A DEDICATED TRANSACTION BUS
XWCOLx
PORT 1
DMA RAM
CPU Peripheral DS Bus
Peripheral
Non-DMA
Ready
PORT 2
DMAxPAD
and
DMA DS Bus
PWCOLx,
and
Preliminary
DMA Controller
7.2
Each DMA channel has its own status and control reg-
ister (DMAxCON) that is used to configure the channel
to support the following operating modes:
• Word or byte size data transfers
• Peripheral to DMA RAM or DMA RAM to
• Post-increment or static DMA RAM address
• One-shot or continuous block transfers
• Auto-switch between two start addresses after
• Force a single DMA transfer (Manual mode)
Each DMA channel can be independently configured
to:
• Select from one of 19 DMA request sources
• Manually enable or disable the DMA channel
• Interrupt the CPU when the transfer is half or fully
DMA channel interrupts are routed to the interrupt con-
troller module and enabled through associated enable
flags.
The channel DMA RAM and peripheral write collision
Faults are combined into a single DMAC error trap
(Level 10) and are not maskable. Each channel has
DMA RAM write collision (XWCOLx) and peripheral
write collision (PWCOLx) status bits in the DMAC Sta-
tus register (DMACS) to allow the DMAC error trap
handler to determine the source of the Fault condition.
peripheral transfers
each transfer complete (Ping-Pong mode)
complete
Channels
DMA
Peripheral Indirect Address
DMAC Operating Modes
Peripheral 1
CPU
Ready
DMA
© 2006 Microchip Technology Inc.
DMA
Peripheral 3
CPU
Ready
DMA
DMA
Peripheral 2
CPU
Ready
DMA
DMA

Related parts for PIC24HJ64GP510-I/PF