PIC18F4553-I/P Microchip Technology, PIC18F4553-I/P Datasheet - Page 3

• Manufacturer Part Number: PIC18F4553-I/P
• Description: IC PIC MCU FLASH 16KX16 40-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4553-I/P

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 34
• Eeprom Size: 256 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: MSSP/I2C/SPI/EUSART/CCP/ECCP
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM163025
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM163025 - PIC DEM FULL SPEED USB DEMO BRD444-1001 - DEMO BOARD FOR PICMICRO MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Universal Serial Bus Features:
• USB V2.0 Compliant
• Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s)
• Supports Control, Interrupt, Isochronous and Bulk
• Supports up to 32 Endpoints (16 bidirectional)
• 1-Kbyte Dual Access RAM for USB
• On-Chip USB Transceiver with On-Chip Voltage
• Interface for Off-Chip USB Transceiver
• Streaming Parallel Port (SPP) for USB Streaming
Power-Managed Modes:
• Run: CPU On, Peripherals On
• Idle: CPU Off, Peripherals On
• Sleep: CPU Off, Peripherals Off
• Idle mode Currents Down to 5.8 μA Typical
• Sleep mode Currents Down to 0.1 μA Typical
• Timer1 Oscillator: 1.1 μA Typical, 32 kHz, 2V
• Watchdog Timer: 2.1 μA Typical
• Two-Speed Oscillator Start-up
Special Microcontroller Features:
• C Compiler Optimized Architecture with Optional
• 100,000 Erase/Write Cycle Enhanced Flash
• 1,000,000 Erase/Write Cycle Data EEPROM
• Flash/Data EEPROM Retention: > 40 Years
• Self-Programmable under Software Control
• Priority Levels for Interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
• Programmable Code Protection
• Single-Supply 5V In-Circuit Serial
• In-Circuit Debug (ICD) via Two Pins
• Optional Dedicated ICD/ICSP Port (44-pin TQFP
• Wide Operating Voltage Range (2.0V to 5.5V)
© 2009 Microchip Technology Inc.
PIC18F2458
PIC18F2553
PIC18F4458
PIC18F4553
Microcontrollers with 12-Bit A/D and nanoWatt Technology
Transfers
Regulator
Transfers (40/44-pin devices only)
Extended Instruction Set
Program Memory Typical
Memory Typical
- Programmable period from 41 ms to 131s
Programming™ (ICSP™) via Two Pins
package only)
Device
28/40/44-Pin High-Performance, Enhanced Flash, USB
(bytes)
Flash
24K
32K
24K
32K
Program Memory
# Single-Word
Instructions
12288
16384
12288
16384
(bytes)
SRAM
2048
Data Memory
EEPROM
PIC18F2458/2553/4458/4553
(bytes)
256
I/O
24
35
A/D (ch)
12-Bit
10
13
Flexible Oscillator Structure:
• Four Crystal modes, Including High-Precision PLL
• Two External Clock modes, up to 48 MHz
• Internal Oscillator Block:
• Secondary Oscillator using Timer1 @ 32 kHz
• Dual Oscillator Options allow Microcontroller and
• Fail-Safe Clock Monitor:
Peripheral Highlights:
• High-Current Sink/Source: 25 mA/25 mA
• Three External Interrupts
• Four Timer modules (Timer0 to Timer3)
• Up to 2 Capture/Compare/PWM (CCP) modules:
• Enhanced Capture/Compare/PWM (ECCP) module:
• Enhanced USART module:
• Master Synchronous Serial Port (MSSP) module
• 12-Bit, up to 13-Channel Analog-to-Digital Converter
• Dual Analog Comparators with Input Multiplexing
for USB
- 8 user-selectable frequencies, from 31 kHz
- User-tunable to compensate for frequency drift
USB module to Run at Different Clock Speeds
- Allows for safe shutdown if any clock stops
- Capture is 16-bit, max. resolution 5.2 ns (T
- Compare is 16-bit, max. resolution 83.3 ns (T
- PWM output: PWM resolution is 1 to 10-bits
- Multiple output modes
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
- LIN bus support
supporting 3-wire SPI (all 4 modes) and I
Master and Slave modes
module (A/D) with Programmable Acquisition Time
Note:
to 8 MHz
CCP/ECCP
(PWM)
2/0
1/1
This document is supplemented by
the “PIC18F2455/2550/4455/4550
Sheet”
“Device Overview”.
SPP
Yes
No
(DS39632).
SPI
Y
MSSP
Master
I
2
C™
Y
See
DS39887C-page 3
1
Section 1.0
2
2
C™
8/16-Bit
CY
Timers
Data
1/3
/16)
CY
)