AT91M40800-33AU Atmel, AT91M40800-33AU Datasheet - Page 108

• Manufacturer Part Number: AT91M40800-33AU
• Description: IC ARM7 MCU 100 LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M40800-33AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100TQFP
• Device Core: ARM7TDMI
• Family Name: 91M
• Maximum Speed: 33 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 32
• Interface Type: EBI/USART
• Number Of Timers: 3
• Processor Series: AT91Mx
• Core: ARM7TDMI
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 33 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• Eeprom Memory: 0 Bytes
• Input Output: 32
• Interface: EBI/EMI, UART/USART
• Ios: 32
• Memory Type: ROMless
• Number Of Bits: 32
• Package Type: 100-pin LQFP
• Programmable Memory: 0 Bytes
• Timers: 3-16-bit
• Voltage, Range: 1.8-3.6 V
• Cpu Family: 91M
• Device Core Size: 32b
• Frequency (max): 33MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 8KB
• # I/os (max): 32
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 1.8V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

USART Control Register
Name:
Access Type:Write Only
Offset:
• RSTRX: Reset Receiver (Code Label US_RSTRX)
0 = No effect.
1 = The receiver logic is reset.
• RSTTX: Reset Transmitter (Code Label US_RSTTX)
0 = No effect.
1 = The transmitter logic is reset.
• RXEN: Receiver Enable (Code Label US_RXEN)
0 = No effect.
1 = The receiver is enabled if RXDIS is 0.
• RXDIS: Receiver Disable (Code Label US_RXDIS)
0 = No effect.
1 = The receiver is disabled.
• TXEN: Transmitter Enable (Code Label US_TXEN)
0 = No effect.
1 = The transmitter is enabled if TXDIS is 0.
• TXDIS: Transmitter Disable (Code Label US_TXDIS)
0 = No effect.
1 = The transmitter is disabled.
• RSTSTA: Reset Status Bits (Code Label US_RSTSTA)
0 = No effect.
1 = Resets the status bits PARE, FRAME, OVRE and RXBRK in the US_CSR.
• STTBRK: Start Break (Code Label US_STTBRK)
0 = No effect.
1 = If break is not being transmitted, start transmission of a break after the characters present in US_THR and the Transmit
Shift Register have been transmitted.
• STPBRK: Stop Break (Code Label US_STPBRK)
0 = No effect.
1 = If a break is being transmitted, stop transmission of the break after a minimum of one character length and transmit a
high level during 12 bit periods.
108
TXDIS
31
23
15
–
–
–
7
AT91X40 Series
US_CR
0x00
TXEN
30
22
14
–
–
–
6
RXDIS
29
21
13
–
–
–
5
SENDA
RXEN
28
20
12
–
–
4
STTTO
RSTTX
27
19
11
–
–
3
STPBRK
RSTRX
26
18
10
–
–
2
STTBRK
25
17
–
–
9
1
–
1354D–ATARM–08/02
RSTSTA
24
16
–
–
–
8
0