ATXMEGA256A3-AU Atmel, ATXMEGA256A3-AU Datasheet - Page 103
![MCU AVR 256K FLASH 1.8V 64-TQFP](/photos/12/13/121332/313-64-tqfp_sml.jpg)
ATXMEGA256A3-AU
Manufacturer Part Number
ATXMEGA256A3-AU
Description
MCU AVR 256K FLASH 1.8V 64-TQFP
Manufacturer
Atmel
Series
AVR® XMEGAr
Datasheet
1.ATXMEGA64A3-MH.pdf
(134 pages)
Specifications of ATXMEGA256A3-AU
Core Processor
AVR
Core Size
8/16-Bit
Speed
32MHz
Connectivity
I²C, IrDA, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number Of I /o
50
Program Memory Size
256KB (128K x 16)
Program Memory Type
FLASH
Eeprom Size
4K x 8
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
1.6 V ~ 3.6 V
Data Converters
A/D 16x12b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TQFP, 64-VQFP
Package
64TQFP
Device Core
AVR
Family Name
XMEGA
Maximum Speed
32 MHz
Operating Supply Voltage
1.8|2.5|3.3 V
Data Bus Width
8|16 Bit
Number Of Programmable I/os
50
Interface Type
SPI/TWI/USART
On-chip Adc
2(8-chx12-bit)
On-chip Dac
2-chx12-bit
Number Of Timers
7
Processor Series
ATXMEGA256x
Core
AVR8
Data Ram Size
16 KB
Maximum Clock Frequency
32 MHz
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
EWAVR, EWAVR-BL
Development Tools By Supplier
ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
Minimum Operating Temperature
- 40 C
For Use With
ATSTK600-TQFP64 - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPIATAVRISP2 - PROGRAMMER AVR IN SYSTEM
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATXMEGA256A3-AU
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
Part Number:
ATXMEGA256A3-AUR
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
8068T–AVR–12/10
11. DAC is nonlinear and inaccurate when reference is above 2.4V or VCC - 0.6V
12.
13. DAC refresh may be blocked in S/H mode
14. Conversion lost on DAC channel B in event triggered mode
15. EEPROM page buffer always written when NVM DATA0 is written
Problem fix/Workaround
Do not set the BOD level higher than VCC even if the BOD is not used.
Using the DAC with a reference voltage above 2.4V or VCC - 0.6V will give inaccurate out-
put when converting codes that give below 0.75V output:
– ±10 LSB for continuous mode
– ±200 LSB for Sample and Hold mode
Problem fix/Workaround
None.
DAC has increased INL or noise for some operating conditions
Some DAC configurations or operating condition will result in increased output error.
– Continous mode: ±5 LSB
– Sample and hold mode: ±15 LSB
– Sample and hold mode for reference above 2.0v: up to ±100 LSB
Problem fix/Workaround
None.
If the DAC is running in Sample and Hold (S/H) mode and conversion for one channel is
done at maximum rate (i.e. the DAC is always busy doing conversion for this channel), this
will block refresh signals to the second channel.
Problem fix/Workaround
When using the DAC in S/H mode, ensure that none of the channels is running at maximum
conversion rate, or ensure that the conversion rate of both channels is high enough to not
require refresh.
If during dual channel operation channel 1 is set in auto trigged conversion mode, channel 1
conversions are occasionally lost. This means that not all data-values written to the
Channel 1 data register are converted.
Problem fix/Workaround
Keep the DAC conversion interval in the range 000-001 (1 and 3 CLK), and limit the Periph-
eral clock frequency so the conversion internal never is shorter than 1.5 µs.
If the EEPROM is memory mapped, writing to NVM DATA0 will corrupt data in the EEPROM
page buffer.
Problem fix/Workaround
Before writing to NVM DATA0, for example when doing software CRC or flash page buffer
write, check if EEPROM page buffer active loading flag (EELOAD) is set. Do not write NVM
DATA0 when EELOAD is set.
XMEGA A3
103