MC908JB8ADWE Freescale Semiconductor, MC908JB8ADWE Datasheet - Page 162

• Manufacturer Part Number: MC908JB8ADWE
• Description: IC MCU 3MHZ 8K FLASH 28-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908JB8ADWE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: USB
• Peripherals: LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: HC08JB
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: USB
• Maximum Clock Frequency: 3 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 2
• Operating Supply Voltage: 5.25 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68EML08GZE, KITUSBSPIDGLEVME, KITUSBSPIEVME, KIT33810EKEVME
• Minimum Operating Temperature: 0 C
• Controller Family/series: HC08
• No. Of I/o's: 21
• Ram Memory Size: 256Byte
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Universal Serial Bus Module (USB)
9.9.1.4 Transmit Endpoint 2
9.9.1.5 Receive Endpoint 2
9.9.2 Resume Interrupt
9.9.3 End-of-Packet Interrupt
Technical Data
162
For an IN transaction directed at endpoint 2, the USB module will
generate an interrupt by setting the TXD2F in the UIR1 register.
For an OUT transaction directed at endpoint 2, the USB module will
generate an interrupt by setting the RXD2F in the UIR1 register.
The USB module will generate a CPU interrupt if low-speed bus activity
is detected after entering the suspend state. A transition of the USB data
lines to the non-idle state (K state) while in the suspend mode will set the
RESUMF flag in the UIR1 register. There is no interrupt enable bit for this
interrupt source and an interrupt will be executed if the I-bit in the CCR
is cleared. A resume interrupt can only occur while the MCU is in the
suspend mode.
The USB module can generate a USB interrupt upon detection of an
end-of-packet signal for low-speed devices. Upon detection of an
end-of-packet signal, the USB module sets the EOPF bit and will
generate a CPU interrupt if the EOPIE bit in the UIR0 register is set.
Universal Serial Bus Module (USB)
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
Freescale Semiconductor