ADUC7129BSTZ126-RL Analog Devices Inc, ADUC7129BSTZ126-RL Datasheet - Page 48
![IC DAS MCU ARM7 ADC/DDS 80-LQFP](/photos/6/69/66992/505-80-qfp_sml.jpg)
ADUC7129BSTZ126-RL
Manufacturer Part Number
ADUC7129BSTZ126-RL
Description
IC DAS MCU ARM7 ADC/DDS 80-LQFP
Manufacturer
Analog Devices Inc
Series
MicroConverter® ADuC7xxxr
Datasheet
1.EVAL-ADUC7128QSPZ.pdf
(92 pages)
Specifications of ADUC7129BSTZ126-RL
Core Size
16/32-Bit
Program Memory Size
126KB (126K x 8)
Core Processor
ARM7
Speed
41.78MHz
Connectivity
EBI/EMI, I²C, SPI, UART/USART
Peripherals
PLA, POR, PWM, PSM, Temp Sensor, WDT
Number Of I /o
38
Program Memory Type
FLASH
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 10x12b; D/A 1x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Package / Case
80-LQFP
Controller Family/series
(ARM7) ADUC
No. Of I/o's
40
Cpu Speed
41.78MHz
No. Of Timers
5
Digital Ic Case Style
LQFP
Embedded Interface Type
I2C, SPI, UART
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
ADUC7129BSTZ126-RLTR
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ADUC7129BSTZ126-RL
Manufacturer:
Analog Devices Inc
Quantity:
10 000
ADuC7128/ADuC7129
Comparator Interface
The comparator interface consists of a 16-bit MMR, CMPCON, described in Table 57.
Table 57. CMPCON MMR Bit Designations
Bit
15:11
10
9:8
7:6
5
4:3
2
1
0
Value
00
01
10
11
00
01
10
11
00
01
10
11
Name
CMPEN
CMPIN
CMPOC
CMPOL
CMPRES
CMPHYST
CMPORI
CMPOFI
Description
Reserved.
Comparator Enable Bit.
Note: A comparator interrupt is generated on the enable of the comparator. This should be cleared in the
user software.
Comparator Negative Input Select Bits.
AVDD/2.
ADC3 input.
V
Reserved.
Comparator Output Configuration Bits.
IRQ and PLA connections disabled.
IRQ and PLA connections disabled.
PLA connections enabled.
IRQ connections enabled.
Comparator Output Logic State Bit.
Response Time.
5 μs response time typical for large signals (2.5 V differential).
17 μs response time typical for small signals (0.65 mV differential).
Reserved.
Reserved.
3 μs response time typical for any signal type.
Comparator Hysteresis Bit.
Comparator Output Rising Edge Interrupt.
Comparator Output Falling Edge Interrupt.
REF
When low, the comparator output is high when the positive input (CMP0) is above the negative
input (CMP1).
When high, the comparator output is high when the positive input is below the negative input.
Set by user to have a hysteresis of about 7.5 mV.
Cleared by user to have no hysteresis.
Set automatically when a rising edge occurs on the monitored voltage (CMP0).
Cleared by user by writing a 1 to this bit.
Set automatically when a falling edge occurs on the monitored voltage (CMP0).
Cleared by user.
Set by user to enable the comparator.
Cleared by user to disable the comparator.
× 0.6.
Rev. 0 | Page 48 of 92