PIC16CE624-04/P Microchip Technology, PIC16CE624-04/P Datasheet - Page 50

• Manufacturer Part Number: PIC16CE624-04/P
• Description: IC MCU OTP 1KX14 EE COMP 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16CE624-04/P

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Oscillator Type: External
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 13
• Program Memory Type: OTP
• Eeprom Size: 128 x 8
• Ram Size: 96 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 13
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 96Byte
• Cpu Speed: 4MHz
• No. Of: RoHS Compliant
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 96 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 1
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 309-1059 - ADAPTER 18 ZIF BD W/18SO PLUGSDVA16XP180 - ADAPTER DEVICE FOR MPLAB-ICEAC164010 - MODULE SKT PROMATEII DIP/SOIC
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC16CE62X
10.1
The configuration bits can be programmed (read as ’0’)
or left unprogrammed (read as ’1’) to select various
device configurations. These bits are mapped in
program memory location 2007h.
REGISTER 10-1: CONFIGURATION WORD
DS40182C-page 50
bit13
bit 13-8,
bit 7:
bit 6:
bit 3:
bit 2:
bit 1-0:
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT), regardless of the value of bit PWRTE.
CP1
5-4:
2: All of the CP<1:0> pairs have to be given the same value to enable the code protection scheme listed.
CP0
Configuration Bits
CP1:CP0 Pairs: Code protection bit pairs
Code protection for 2K program memory
11 = Program memory code protection off
10 = 0400h-07FFh code protected
01 = 0200h-07FFh code protected
00 = 0000h-07FFh code protected
Code protection for 1K program memory
11 = Program memory code protection off
10 =Program memory code protection on
01 = 0200h-03FFh code protected
00 = 0000h-03FFh code protected
Code protection for 0.5K program memory
11 = Program memory code protection off
10 = Program memory code protection off
01 = Program memory code protection off
00 = 0000h-01FFh code protected
Unimplemented: Read as ’1’
BODEN: Brown-out Reset Enable bit
1 = BOD enabled
0 = BOD disabled
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
(2)
CP1
CP0
(2)
CP1
CP0
(2)
— BODEN
(1)
(1)
(2)
(1)
CP1
CP0
(2)
The user will note that address 2007h is beyond
the user program memory space. In fact, it belongs
to the special test/configuration
(2000h – 3FFFh), which can be accessed only during
programming.
PWRTE
(1)
WDTE F0SC1
F0SC0
1999 Microchip Technology Inc.
bit0
CONFIG
REGISTER:
memory
Address
2007h
space