Z8F0413SH005EC Zilog, Z8F0413SH005EC Datasheet - Page 20

• Manufacturer Part Number: Z8F0413SH005EC
• Description: IC ENCORE MCU FLASH 4K 20SOIC
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F0413SH005EC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 5MHz
• Connectivity: IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 20-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Other names: 269-3486

Table 3. Signal Descriptions (Continued)
Pin Characteristics
PS024314-0308
Signal Mnemonic
Analog
ANA[7:0]
VREF
Clock Input
CLKIN
LED Drivers
LED
On-Chip Debugger
DBG
Reset
RESET
Power Supply
V
AV
V
AV
Note: The AV
DD
SS
DD
SS
PB7 on 28-pin packages without ADC.
DD
and AV
Table 4
Z8 Encore! XP F0823 Series 20- and 28-pin devices. Data in
cally by the pin symbol mnemonic.
SS
I/O
I/O
I/O
I/O
O
provides detailed information about the characteristics for each pin available on
I
I
I
I
I
I
signals are available only in 28-pin packages with ADC. They are replaced by PB6 and
Description
Analog port. These signals are used as inputs to the ADC. The ANA0,
ANA1, and ANA2 pins can also access the inputs and output of the
integrated transimpedance amplifier.
Analog-to-Digital Converter reference voltage input.
Clock Input Signal. This pin can be used to input a TTL-level signal to be
used as the system clock.
Direct LED drive capability. All port C pins have the capability to drive an
LED without any other external components. These pins have
programmable drive strengths set by the GPIO block.
Debug. This signal is the control and data input and output to and from the
OCD.
RESET. Generates a reset when asserted (driven Low). Also serves as a
reset indicator; the Z8 Encore! XP forces this pin Low when in reset. This
pin is open-drain and features an enabled internal pull-up resistor.
Digital Power Supply.
Analog Power Supply.
Digital Ground.
Analog Ground.
Caution:
The DBG pin is open-drain and requires an external pull-
up resistor to ensure proper operation.
Z8 Encore! XP
Table 4
Product Specification
is sorted alphabeti-
®
F0823 Series
Pin Description
10