MC908AZ60AMFUE Freescale Semiconductor, MC908AZ60AMFUE Datasheet - Page 280

• Manufacturer Part Number: MC908AZ60AMFUE
• Description: IC MCU FLASH 8.4MHZ 60K 64QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908AZ60AMFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8.4MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 52
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 15x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-QFP
• Processor Series: HC08AZ
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.4 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 8
• Operating Supply Voltage: 5 V to 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE, ZK-HC08AX-A, M68EM08AS/AZ60AE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 15 Channel
• Package: 64PQFP
• Family Name: HC08
• Maximum Speed: 8.4 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MSCAN Controller (MSCAN08)
The synchronization jump width (SJW) can be programmed in a range of 1 to 4 time quanta by setting the
SJW parameter.
The above parameters can be set by programming the bus timing registers, CBTR0–CBTR1, see
MSCAN08 Bus Timing Register 0
Table 23-8
280
•
Time segment 2: This segment represents PHASE_SEG2 of the CAN standard. It can be
programmed by setting the TSEG2 parameter to be 2 to 8 time quanta long.
gives an overview on the CAN conforming segment settings and the related parameter values.
It is the user’s responsibility to make sure that the bit timing settings are in
compliance with the CAN standard,
MC68HC908AZ60A • MC68HC908AS60A • MC68HC908AS60E Data Sheet, Rev. 6
SYNC
_SEG
1
Transmit point
Sample point
SYNC_SEG
NRZ SIGNAL
Figure 23-8. Segments within the Bit Time
8... 25 TIME QUANTA
= 1 BIT TIME
and
Bit rate=
Table 23-3Time Segment Syntax
(PROP_SEG + PHASE_SEG1)
23.13.4 MSCAN08 Bus Timing Register
TIME SEGMENT 1
4 ... 16
No. of time quanta
NOTE
.
System expects transitions to occur on the bus
this point. If the three samples per bit option is
A node in receive mode will sample the bus at
selected then this point marks the position of
A node in transmit mode will transfer a new
f
Tq
value to the CAN bus at this point.
SAMPLE POINT
(SINGLE OR TRIPLE SAMPLING)
during this period.
the third sample.
(PHASE_SEG2)
TIME SEG. 2
2 ... 8
1).
Freescale Semiconductor
23.13.3