PIC12LC671-04I/P Microchip Technology, PIC12LC671-04I/P Datasheet - Page 7
![IC MCU OTP 1KX14 LV A/D 8DIP](/photos/16/0/160065/8-pdip-angled-300dpi-lyrd_sml.jpg)
PIC12LC671-04I/P
Manufacturer Part Number
PIC12LC671-04I/P
Description
IC MCU OTP 1KX14 LV A/D 8DIP
Manufacturer
Microchip Technology
Series
PIC® 12Cr
Specifications of PIC12LC671-04I/P
Core Processor
PIC
Core Size
8-Bit
Speed
4MHz
Peripherals
POR, WDT
Number Of I /o
5
Program Memory Size
1.75KB (1K x 14)
Program Memory Type
OTP
Ram Size
128 x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 4x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
8-DIP (0.300", 7.62mm)
Processor Series
PIC12LC
Core
PIC
Data Bus Width
8 bit
Data Ram Size
128 B
Maximum Clock Frequency
4 MHz
Number Of Programmable I/os
5
Number Of Timers
8
Operating Supply Voltage
2.5 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
Through Hole
3rd Party Development Tools
52715-96, 52716-328, 52717-734
Development Tools By Supplier
ICE2000
Minimum Operating Temperature
- 40 C
On-chip Adc
8
For Use With
309-1051 - ADAPTER 8-DIP BD W/2 SO PLUGS
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Connectivity
-
Lead Free Status / Rohs Status
Details
4.
Corrections for the Internal 4 MHz RC Oscillator, Sec-
tion 9.2.5, are shown.
5.
Corrections for Section 9.0, Initialization Conditions for
all registers, Table 9-7, are shown.
TABLE 9-7:
Engineering Samples for the PIC12C671/2 may or may
not follow this operational clarification for the OSCCAL
register.
OSCCAL
Legend: u = unchanged,
Note 1: One or more bits in INTCON and PIR1 will be affected (to cause wake-up).
2001 Microchip Technology Inc.
Module:
9.2.5
OSCCAL, when written to with the calibration
value, will “trim” the internal oscillator to remove
process variation from the oscillator frequency.
Only bits<7:2> of OSCCAL are implemented, and
bits<1:0> should be written as 0 for compatibility
with future devices. The oscillator calibration loca-
tion is not code protected.
Module:
Register
2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector (0004h).
3: See Table 9-5 for RESET value for specific condition.
4: If wake-up was due to A/D completing then bit 6 = 1, all other interrupts generating a wake-up will cause bit 6 = u.
5: If wake-up was due to A/D completing then bit 3 = 0, all other interrupts generating a wake-up will cause bit 3 = u.
INTERNAL 4 MHz RC OSCILLATOR
OSCCAL (Oscillator)
Initialization Condition (OSCCAL)
INITIALIZATION CONDITIONS FOR ALL REGISTERS
Power-on Reset
x = unknown,
1000 00--
- = unimplemented bit, read as ’0’, q = value depends on condition.
MCLR Resets
uuuu uu--
WDT Reset
PIC12C67X
WDT or Interrupt
Wake-up via
uuuu uu--
DS80067C-page 7