PIC16F627A-I/SS Microchip Technology, PIC16F627A-I/SS Datasheet - Page 4

• Manufacturer Part Number: PIC16F627A-I/SS
• Description: IC MCU FLASH 1KX14 EEPROM 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F627A-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 1.75KB (1K x 14)
• Package / Case: 20-SSOP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Eeprom Size: 128 x 8
• Ram Size: 224 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 224 B
• Interface Type: SCI/USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• Package: 20SSOP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SS-1 - SOCKET TRANSITION 18DIP 20SSOPI3DBF648 - BOARD DAUGHTER ICEPIC3AC164307 - MODULE SKT FOR PM3 28SSOPAC162053 - HEADER INTERFACE ICD,ICD2 18DIPAC164018 - MODULE SKT PROMATEII 20SSOP
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC16F627A/628A/648A
Clarifications/Corrections to the Data
Sheet:
In the Device Data Sheet (DS40044F), the following
clarifications and corrections should be noted.
1. Module: In-Circuit Serial Programming™
DS80151N-page 4
Section 14.11: In-Circuit Serial Programming and
Figure 14-18: Typical In-Circuit Serial Programming
Connection. The following paragraph and Note box
are being added to the end of Section 14.11 and
Figure 14-18 is updated to include PGM, noted in
bold.
14.11 In-Circuit Serial Programming
If LVP is not being used for programming, but the LVP
Configuration bit is set (or LVP feature is enabled), the
PGM pin must not be allowed to toggle while
programming. The PGM pin is edge sensitive and if an
edge is detected during programming, it may cause the
PC to reset. If the LVP feature is disabled, the PGM pin
will have no effect on programming.
FIGURE 14-18:
Note:
External
Connector
Signals
Data I/O
Note
CLK
+5V
V
0V
PP
The LVP feature is enabled by default
when the LVP Configuration bit is set.
1:
To Normal
Connections
Do not allow the PGM pin to toggle
while programming.
To Normal
Connections
TYPICAL IN-CIRCUIT
SERIAL
PROGRAMMING™
CONNECTION
© 2008 Microchip Technology Inc.
PIC16F627A/628A/648A
V
V
RA5/MCLR/V
RB6/PGC
RB7/PGD
V
DD
SS
DD
PGM
PP
(1)