PIC18F65J90-I/PT Microchip Technology, PIC18F65J90-I/PT Datasheet - Page 396

• Manufacturer Part Number: PIC18F65J90-I/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J90-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 51
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 51
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm Channels: 2
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183030
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

B.4
Besides the LCD pinout differences already described,
there are other differences in the pinouts between the
PIC18F85J90 and the PIC18F8490 families:
• Input voltage tolerance
• Output current capabilities
• Available I/O
Pins on the PIC18F85J90 that have digital only input
capability will tolerate voltages up to 5.5V, and are thus,
tolerant
Section 9.1 “I/O Port Pin Capabilities” contains the
complete list.
In addition to input differences, there are output differ-
ences as well. PIC18F85J90 devices have three
classes of pin output current capability: high, medium
and low. Not all I/O pins can source or sink equal levels
of current. Only PORTB and PORTC support the
25 mA source/sink capability that is supported by all
output pins on the PIC18F8490. Table 9-1 in
Section 9.1 “I/O Port Pin Capabilities” contains the
complete list of output capabilities.
Finally,
EUSART/AUSART and SPI peripherals can be config-
ured by the user as open-drain outputs. This allows for
simpler interfacing with external devices operating at
higher voltages. This capability is not directly
equivalent to any feature on the PIC18F8490 family.
There are also differences in the implementation of
some ports on PIC18F85J90 devices. While the total
number of general purpose I/O pins are very similar
(67 vs. 66), the implementation of individual pins has
notable differences:
• The MCLR pin is dedicated only to MCLR and
• RF0 does not exist on PIC18F85J90 devices.
• RE0, RE1 and RE3 are implemented on
All of these pin differences (including power pin
differences) should be accounted for when making a
conversion between PIC18F8490 and PIC18F85J90
devices.
© 2007 Microchip Technology Inc.
cannot be configured as an input (RG5) as it can
on PIC18F8490 devices.
PIC18F85J90 devices, but not PIC18F8490
devices.
Pin Differences
the
to
voltages
pins
associated
above
V
DD
with
.
Table 9-1
the
CCP,
Preliminary
in
PIC18F85J90 FAMILY
B.5
Peripherals must also be considered when making a
conversion between the PIC18F85J90 and the
PIC18F8490 families:
• A/D Converter: The converter for PIC18F85J90
• Data EEPROM: PIC18F85J90 devices do not
• BOR: PIC18F85J90 devices do not have a
• LVD: PIC18F85J90 devices do not have this
devices require a calibration step prior to normal
operation.
have this module but offer self-programming
capability.
programmable BOR. Simple brown-out capability
is provided through the use of the internal voltage
regulator.
module. A limited, fixed setpoint capability is
provided through the use of the internal voltage
regulator.
Other Peripherals
DS39770B-page 395