PIC18F97J60T-I/PT Microchip Technology, PIC18F97J60T-I/PT Datasheet - Page 72

• Manufacturer Part Number: PIC18F97J60T-I/PT
• Description: IC PIC MCU FLASH 64KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60T-I/PT

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: FLASH
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 70
• Ram Memory Size: 3808Byte
• Cpu Speed: 41.667MHz
• No. Of Timers: 5
• No. Of: RoHS Compliant
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver, Ethernet, EUSART, I2C, MSSP, SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2AC164323 - MODULE SKT FOR 100TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F97J60 FAMILY
5.1.1
All PIC18 devices have a total of three hard-coded
return vectors in their program memory space. The
Reset vector address is the default value to which the
program counter returns on all device Resets; it is
located at 0000h.
PIC18 devices also have two interrupt vector
addresses for the handling of high-priority and
low-priority interrupts. The high-priority interrupt vector
is located at 0008h and the low-priority interrupt vector
is at 0018h. Their locations in relation to the program
memory map are shown in Figure 5-2.
FIGURE 5-2:
DS39762E-page 72
Legend:
High-Priority Interrupt Vector 0008h
Low-Priority Interrupt Vector
Flash Configuration Words
Program Memory
HARD MEMORY VECTORS
Reset Vector
Read as ‘
(Top of Memory) represents upper boundary
of on-chip program memory space (see
Figure 5-1 for device-specific values).
Shaded area represents unimplemented
memory. Areas are not shown to scale.
On-Chip
0
HARD VECTOR AND
CONFIGURATION WORD
LOCATIONS FOR
PIC18F97J60 FAMILY
DEVICES
’
0000h
0018h
(Top of Memory-7)
(Top of Memory)
1FFFFFh
5.1.2
Because the PIC18F97J60 family devices do not have
persistent configuration memory, the top four words of
on-chip program memory are reserved for configuration
information. On Reset, the configuration information is
copied into the Configuration registers.
The Configuration Words are stored in their program
memory location in numerical order, starting with the
lower byte of CONFIG1 at the lowest address and end-
ing with the upper byte of CONFIG4. For these devices,
only
CONFIG3, are used; CONFIG4 is reserved. The actual
addresses of the Flash Configuration Words for
devices in the PIC18F97J60 family are shown in
Table 5-1. Their location in the memory map is shown
with the other memory vectors in Figure 5-2.
Additional details on the device Configuration Words
are provided in Section 24.1 “Configuration Bits”.
TABLE 5-1:
PIC18F66J60
PIC18F86J60
PIC18F96J60
PIC18F66J65
PIC18F86J65
PIC18F96J65
PIC18F67J60
PIC18F87J60
PIC18F97J60
Device
Configuration
FLASH CONFIGURATION WORDS
FLASH CONFIGURATION
WORDS FOR PIC18F97J60
FAMILY DEVICES
Program
(Kbytes)
Memory
Words,
© 2009 Microchip Technology Inc.
128
64
96
CONFIG1
Word Addresses
FFF8h to FFFFh
Configuration
1FFF8h to
17FF8h to
1FFFFh
17FFFh
through