PIC18F4431-E/PT Microchip Technology, PIC18F4431-E/PT Datasheet - Page 92

IC MCU FLASH 8KX16 44TQFP

PIC18F4431-E/PT

Manufacturer Part Number
PIC18F4431-E/PT
Description
IC MCU FLASH 8KX16 44TQFP
Manufacturer
Microchip Technology
Series
PIC® 18Fr

Specifications of PIC18F4431-E/PT

Core Size
8-Bit
Program Memory Size
16KB (8K x 16)
Oscillator Type
Internal
Core Processor
PIC
Speed
40MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
Number Of I /o
36
Program Memory Type
FLASH
Eeprom Size
256 x 8
Ram Size
768 x 8
Voltage - Supply (vcc/vdd)
4.2 V ~ 5.5 V
Data Converters
A/D 9x10b
Operating Temperature
-40°C ~ 125°C
Package / Case
44-TQFP, 44-VQFP
Controller Family/series
PIC18
No. Of I/o's
36
Eeprom Memory Size
256Byte
Ram Memory Size
768Byte
Cpu Speed
40MHz
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC18F4431-E/PT
Manufacturer:
JOHANSON
Quantity:
24 000
Part Number:
PIC18F4431-E/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
PIC18F2331/2431/4331/4431
8.5.1
The sequence of events for programming an internal
program memory location should be:
1.
2.
3.
4.
5.
6.
DS39616D-page 92
Read 64 bytes into RAM.
Update data values in RAM as necessary.
Load Table Pointer with address being erased.
Do the row erase procedure (see
“Flash Program Memory Erase
Load Table Pointer with the address of the first
byte being written.
Write the first 8 bytes into the holding registers
with auto-increment.
FLASH PROGRAM MEMORY WRITE
SEQUENCE
Sequence”).
Section 8.4.1
7.
8.
9.
10. Write 0AAh to EECON2.
11. Set the WR bit. This will begin the write cycle.
12. The CPU will stall for the duration of the write
13. Execute a NOP.
14. Re-enable interrupts.
15. Repeat Steps 6-14 seven times to write
16. Verify the memory (table read).
This procedure will require about 18 ms to update one
row of 64 bytes of memory. An example of the required
code is given in
Set the EECON1 register for the write operation
by doing the following:
• Set the EEPGD bit to point to program
• Clear the CFGS bit to access program
• Set the WREN bit to enable byte writes
Disable interrupts.
Write 55h to EECON2.
(about 2 ms using internal timer).
64 bytes.
memory
memory
Example
 2010 Microchip Technology Inc.
8-3.

Related parts for PIC18F4431-E/PT