PIC18F4431-I/ML Microchip Technology, PIC18F4431-I/ML Datasheet - Page 170

• Manufacturer Part Number: PIC18F4431-I/ML
• Description: IC PIC MCU FLASH 8KX16 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4431-I/ML

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: EUSART, I2C, SPI, SSP
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 1 x 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9 bit
• Package: 44QFN EP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44QFN2 - SOCKET TRAN ICE 44QFN/40DIPAC164322 - MODULE SOCKET MPLAB PM3 28/44QFN444-1001 - DEMO BOARD FOR PICMICRO MCU
• Lead Free Status / Rohs Status: Details

PIC18F2331/2431/4331/4431
16.1.8
The
(CAP1M3:CAP1M0 = 1110 or 1111) enables the
Special Event Trigger signal. The trigger signal can be
used as the Special Event Trigger Reset input to TMR5,
resetting the timer when the specific event happens on
IC1. The events are summarized in Table 16-2.
TABLE 16-2:
TABLE 16-3:
DS39616C-page 168
Note 1:
CAP1 0001-0100 Edge Capture
CAP2 0001-0100 Edge Capture
CAP3 0001-0100 Edge Capture
Pin
CAP1M3:
CAP1M0
1110
1111
Special
2:
0110-0111 Pulse-Width
1110-1111 Special Event Trigger
0110-0111 Pulse-Width
0110-0111 Pulse-Width
CAPxM
Timer5 may be reset on capture events only when CAPxREN = 1.
Trigger mode will not reset Timer5 unless RESEN = 0 in the T5CON register.
SPECIAL EVENT TRIGGER
(CAP1 ONLY)
0101
1000
0101
1000
0101
1000
The trigger occurs on every falling
edge on the CAP1 input.
The trigger occurs on every rising
edge on the CAP1 input.
Event
SPECIAL EVENT TRIGGER
INPUT CAPTURE TIME BASE RESET SUMMARY
Period Measurement
Measurement
Input Capture on State
Change
(rising or falling edge)
Period Measurement
Measurement
Input Capture on State
Change
Period Measurement
Measurement
Input Capture on State
Change
Trigger
Description
Mode
mode
of
Timer
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
TMR5
Preliminary
IC1
Reset Timer
on Capture
optional
optional
optional
optional
optional
optional
optional
optional
optional
optional
always
always
always
16.1.9
Table 16-3 shows a summary of the input capture
configuration when used in conjunction with the TMR5
timer resource.
16.1.10
Although the IC and QEI submodules are mutually
exclusive, the IC can be reconfigured to work with the
QEI module to perform specific functions. In effect, the
QEI “borrows” hardware from the IC to perform these
operations.
For velocity measurement, the QEI uses dedicated
hardware in channel IC1. The CAP1BUF registers are
remapped, becoming the VELR registers. Its operation
and use are described in Section 16.2.6 “Velocity
Measurement”.
While in QEI mode, the CAP2BUF and CAP3BUF reg-
isters of channel IC2 and IC3 are used for position
determination. They are remapped as the POSCNT
and MAXCNT Buffer registers, respectively.
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
Simple Edge Capture mode (includes a
selectable prescaler).
Captures Timer5 on period boundaries.
Captures Timer5 on pulse boundaries.
Captures Timer5 on state change.
Used as a Special Event Trigger to be
used with the Timer5 or other peripheral
modules.
Simple Edge Capture mode (includes a
selectable prescaler).
Captures Timer5 on period boundaries.
Captures Timer5 on pulse boundaries.
Captures Timer5 on state change.
Simple Edge Capture mode (includes a
selectable prescaler).
Captures Timer5 on period boundaries.
Captures Timer5 on pulse boundaries.
Captures Timer5 on state change.
OPERATING MODES SUMMARY
OTHER OPERATING MODES
© 2007 Microchip Technology Inc.
Description