PIC18F2480-I/SP Microchip Technology, PIC18F2480-I/SP Datasheet - Page 301

• Manufacturer Part Number: PIC18F2480-I/SP
• Description: IC PIC MCU FLASH 8KX16 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2480-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/MSSP/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM163011, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Height: 3.3 mm
• Length: 34.67 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 24-23: BnCON: TX/RX BUFFER n CONTROL REGISTERS IN TRANSMIT MODE
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
TXBIF
R/W-0
2:
3:
4:
5:
(3)
These registers are available in Mode 1 and 2 only.
Clearing this bit in software while the bit is set will request a message abort.
This bit is automatically cleared when TXREQ is set.
While TXREQ is set or a transmission is in progress, Transmit Buffer registers remain read-only.
These bits set the order in which the Transmit Buffer register will be transferred. They do not alter the CAN
message identifier.
TXBIF: Transmit Buffer Interrupt Flag bit
1 = A message is successfully transmitted
0 = No message was transmitted
TXABT: Transmission Aborted Status bit
1 = Message was aborted
0 = Message was not aborted
TXLARB: Transmission Lost Arbitration Status bit
1 = Message lost arbitration while being sent
0 = Message did not lose arbitration while being sent
TXERR: Transmission Error Detected Status bit
1 = A bus error occurred while the message was being sent
0 = A bus error did not occur while the message was being sent
TXREQ: Transmit Request Status bit
1 = Requests sending a message; clears the TXABT, TXLARB and TXERR bits
0 = Automatically cleared when the message is successfully sent
RTREN: Automatic Remote Transmission Request Enable bit
1 = When a remote transmission request is received, TXREQ will be automatically set
0 = When a remote transmission request is received, TXREQ will be unaffected
TXPRI<1:0>: Transmit Priority bits
11 = Priority Level 3 (highest priority)
10 = Priority Level 2
01 = Priority Level 1
00 = Priority Level 0 (lowest priority)
TXABT
R-0
[0 ≤ n ≤ 5, TXnEN (BSEL0<n>) = 1]
(3)
W = Writable bit
‘1’ = Bit is set
TXLARB
R-0
(3)
PIC18F2480/2580/4480/4580
TXERR
R-0
(5)
(2,4)
(3)
(3)
(3)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
TXREQ
R/W-0
(1)
(3)
(3)
(2,4)
RTREN
R/W-0
x = Bit is unknown
TXPRI1
R/W-0
DS39637D-page 301
(5)
TXPRI0
R/W-0
bit 0
(5)