PIC18F2480-I/SP Microchip Technology, PIC18F2480-I/SP Datasheet - Page 8

• Manufacturer Part Number: PIC18F2480-I/SP
• Description: IC PIC MCU FLASH 8KX16 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2480-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/MSSP/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM163011, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Height: 3.3 mm
• Length: 34.67 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F2480/2580/4480/4580
7. Module: ECAN™ Technology
8. Module: ECAN Technology
DS80496C-page 8
Under specific conditions, the first five bits of a
transmitted identifier may not match the value in
the Transmit Buffer ID register, TXBnSIDH. The
following conditions must exist for the corruption
to occur:
• A transmit message must be pending
• The ECAN module must detect a
Work around
None.
Affected Silicon Revisions
The Error Interrupt Flag, ERRIF (PIR3<5>), may
not be able to be cleared in software after either
of the following counter registers exceeds 127:
• Transmit Error Counter Register (TXERRCNT)
• Receive Error Counter Register (RXERRCNT)
Work around
Monitor the EWARN (COMSTAT<0>) bit to
determine if either the TXERRCNT or the
RXERRCNT exceeds 95 and clear the ERRIF
flag before either counter reaches 127.
Affected Silicon Revisions
A1
A1
Start-of-Frame (SOF) in the third bit of the
interframe space.
X
X
B0
B0
B2
B2
9. Module: ECAN Technology
Following an error on the bus, the ECAN module
is unable to switch from Listen Only mode
directly to Configuration mode.
Work around
Use the REQOP (CANCON<7:5>) bits to select
Normal mode as an intermediate step when
switching from Listen Only mode to Configuration
mode.
Affected Silicon Revisions
A1
X
B0
B2
 2010 Microchip Technology Inc.