PIC24HJ64GP210-I/PF Microchip Technology, PIC24HJ64GP210-I/PF Datasheet - Page 227

• Manufacturer Part Number: PIC24HJ64GP210-I/PF
• Description: IC PIC MCU FLASH 32KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP210-I/PF

• Core Size: 16-Bit
• Program Memory Size: 64KB (22K x 24)
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Controller Family/series: PIC24
• No. Of I/o's: 85
• Ram Memory Size: 8KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• No. Of Pwm Channels: 8
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164333 - MODULE SKT FOR PM3 100QFPDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

20.4
PIC24H devices implement a JTAG interface, which
supports boundary scan device testing, as well as
in-circuit programming. Detailed information on the
interface will be provided in future revisions of the
document.
20.5
For all devices in the PIC24H family of devices, the
on-chip program memory space is treated as a single
block. Code protection for this block is controlled by a
pair of Configuration bits, GCP and GWRP. These bits
inhibit program memory reads and writes, respectively.
20.6
PIC24H family digital signal controllers can be serially
programmed while in the end application circuit. This is
simply done with two lines for clock and data and three
other lines for power, ground and the programming
sequence. This allows customers to manufacture
boards with unprogrammed devices and then program
the digital signal controller just before shipping the
product. This also allows the most recent firmware or a
custom firmware, to be programmed. Please refer to
the “dsPIC33F Flash Programming Specification”
(DS70152) document for details about ICSP
programming capability.
Any 1 out of 3 pairs of programming clock/data pins
may be used:
• PGC1/EMUC1 and PGD1/EMUD1
• PGC2/EMUC2 and PGD2/EMUD2
• PGC3/EMUC3 and PGD3/EMUD3
© 2006 Microchip Technology Inc.
JTAG Interface
Code Protection
In-Circuit Serial Programming
Programming Capability
Preliminary
20.7
When MPLAB
in-circuit debugging functionality is enabled. This func-
tion allows simple debugging functions when used with
MPLAB IDE. Debugging functionality is controlled
through the EMUCx (Emulation/Debug Clock) and
EMUDx (Emulation/Debug Data) pin functions.
Any 1 out of 3 pairs of debugging clock/data pins may
be used:
• PGC1/EMUC1 and PGD1/EMUD1
• PGC2/EMUC2 and PGD2/EMUD2
• PGC3/EMUC3 and PGD3/EMUD3
To use the in-circuit debugger function of the device,
the design must implement ICSP programming capa-
bility connections to MCLR, V
the EMUDx/EMUCx pin pair. In addition, when the fea-
ture is enabled, some of the resources are not available
for general use. These resources include the first 80
bytes of data RAM and two I/O pins.
In-Circuit Debugger
®
ICD 2 is selected as a debugger, the
DD
, V
PIC24H
SS
DS70175C-page 225
, PGC, PGD and