DSPIC30F6012AT-30I/PT Microchip Technology, DSPIC30F6012AT-30I/PT Datasheet - Page 3

IC DSPIC MCU/DSP 144K 64TQFP

DSPIC30F6012AT-30I/PT

Manufacturer Part Number
DSPIC30F6012AT-30I/PT
Description
IC DSPIC MCU/DSP 144K 64TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 30Fr

Specifications of DSPIC30F6012AT-30I/PT

Core Processor
dsPIC
Core Size
16-Bit
Speed
30 MIPs
Connectivity
CAN, I²C, SPI, UART/USART
Peripherals
AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
Number Of I /o
52
Program Memory Size
144KB (48K x 24)
Program Memory Type
FLASH
Eeprom Size
4K x 8
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 16x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TFQFP
For Use With
AC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DSPIC30F6012AT-30I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
DSPIC30F6012AT-30I/PT
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
5. Module: Output Compare
© 2006 Microchip Technology Inc.
A glitch will be produced on an output compare pin
under the following conditions:
• The user software initially drives the I/O pin
• The output compare module is configured and
When these events occur, the output compare
module will drive the pin low for one instruction
cycle (T
Work around
None. However, the user may use a timer interrupt
and write to the associated PORT register to
control the pin manually.
high using the output compare module or a
write to the associated PORT register.
enabled to drive the pin low at some later time
(OCxCON = 0x0002 or OCxCON = 0x0003).
CY
) after the module is enabled.
dsPIC30F6011A/6012A/6013A/6014A
6. Module: Using OSC2/RC15 as Digital I/O
Table 20-2 (see below) from the “dsPIC30F6011A/
6012A/6013A/6014A Data Sheet” (DS70143A)
lists the device clock operational modes. The data
in the table is correct with the following exceptions:
• Digital I/O functionality is not operational in the
• CLKOUT functionality is only supported if the
FRC with PLL (4x, 8x and 16x PLL) Oscillator
mode.
EC or ERC Oscillator mode is actually selected
as the device clock source.
or CLKOUT
DS80242C-page 3

Related parts for DSPIC30F6012AT-30I/PT