DSPIC30F6012AT-30I/PT Microchip Technology, DSPIC30F6012AT-30I/PT Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F6012AT-30I/PT
• Description: IC DSPIC MCU/DSP 144K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6012AT-30I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• For Use With: AC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TABLE 2:
© 2010 Microchip Technology Inc.
Note 1:
Oscillator
Module
ADC
ADC
PLL
LP
Only those issues indicated in the last column apply to the current silicon revision.
Consumption
Sleep Mode
4x and 8x
Feature
in Sleep
SILICON ISSUE SUMMARY (CONTINUED)
Current
Modes
Mode
—
Number
Item
18.
19.
20.
21.
For this revision of silicon, the LP Oscillator is not operational.
ADC event triggers from the INT0 pin will not wake-up the device
from Sleep mode if the SMPI bits are non-zero.
If 4x or 8x PLL mode is used, the input frequency range is 5 MHz-
10 MHz instead of 4 MHz-10 MHz.
If the ADC module is in an enabled state when the device enters
Sleep Mode, the power-down current (I
exceed the device data sheet specifications.
dsPIC30F6011A/6012A/6013A/6014A
Issue Summary
PD
) of the device may
DS80457B-page 3
Revisions
A2 B0 B1
X
X
X
X
Affected
X
(1)
X