ATSAM3S2AA-AU Atmel, ATSAM3S2AA-AU Datasheet - Page 31

• Manufacturer Part Number: ATSAM3S2AA-AU
• Description: IC MCU 32BIT 128KB FLASH 48LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S2AA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 8x10/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 34
• Ram Memory Size: 32KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

9. Memories
9.1
9.1.1
9.1.2
9.1.3
9.1.3.1
9.1.3.2
9.1.3.3
6500CS–ATARM–24-Jan-11
Embedded Memories
Internal SRAM
Internal ROM
Embedded Flash
Flash Overview
Flash Power Supply
Enhanced Embedded Flash Controller
The ATSAM3S4 product (256-Kbyte internal Flash version) embeds a total of 48 Kbytes high-
speed SRAM.
The ATSAM3S2 product (128-Kbyte internal Flash version) embeds a total of 32 Kbytes high-
speed SRAM.
The ATSAM3S1 product (64-Kbyte internal Flash version) embeds a total of 16 Kbytes high-
speed SRAM.
The SRAM is accessible over System Cortex-M3 bus at address 0x2000 0000.
The SRAM is in the bit band region. The bit band alias region is mapped from 0x2200 0000 to
0x23FF FFFF.
The SAM3S product embeds an Internal ROM, which contains the SAM Boot Assistant (SAM-
BA), In Application Programming routines (IAP) and Fast Flash Programming Interface (FFPI).
At any time, the ROM is mapped at address 0x0080 0000.
The Flash of the ATSAM3S4 (256-Kbytes internal Flash version) is organized in one bank of
1024 pages (Single plane) of 256 bytes.
The Flash of the ATSAM3S2 (128-Kbytes internal Flash version) is organized in one bank of 512
pages (Single plane) of 256 bytes.
The Flash of the ATSAM3S1 (64-Kbytes internal Flash version) is organized in one bank of 256
pages (Single plane) of 256 bytes.
The Flash contains a 128-byte write buffer, accessible through a 32-bit interface.
The Flash is supplied by VDDCORE.
The Enhanced Embedded Flash Controller (EEFC) manages accesses performed by the mas-
ters of the system. It enables reading the Flash and writing the write buffer. It also contains a
User Interface, mapped on the APB.
The Enhanced Embedded Flash Controller ensures the interface of the Flash block with the 32-
bit internal bus. Its 128-bit wide memory interface increases performance.
The user can choose between high performance or lower current consumption by selecting
either 128-bit or 64-bit access. It also manages the programming, erasing, locking and unlocking
sequences of the Flash using a full set of commands.
SAM3S Summary
31