PIC18C858-E/PT Microchip Technology, PIC18C858-E/PT Datasheet - Page 10

• Manufacturer Part Number: PIC18C858-E/PT
• Description: IC MCU OTP 16KX16 CAN 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Cr

Specifications of PIC18C858-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: OTP
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-TFQFP
• Processor Series: PIC18C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: 3-Wire, I2C, SPI, USART, CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 68
• Number Of Timers: 4 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: ICE2000, DM163007, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6
• Data Rom Size: 4 KB
• Height: 1 mm
• Length: 12 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.2 V
• Width: 12 mm
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC18C858E/PT

PIC18C658/858
6. Module: USART
EXAMPLE 1:
EXAMPLE 2:
DS80126C-page 10
movwf
nop
btfss
movwf
btfss
The operation of the USART Transmit Interrupt
flag bit TXIF (PIR1<4>) is clarified as follows:
TXIF is not cleared immediately upon loading data
into the transmit buffer TXREG. The flag bit
becomes valid in the second instruction cycle fol-
lowing the load instruction (see Example 1). Poll-
ing TXIF immediately following a load of TXREG
will give invalid results (Example 2).
This clarification applies to all USART transmis-
sion modes (master or slave, synchronous or
asynchronous, 8-bit or 9-bit).
TXREG
PIR1,TXIF
TXREG
PIR1,TXIF
CORRECTLY POLLING
THE TXIF BIT
POLLING THE TXIF BIT
IMMEDIATELY AFTER
LOADING THE TRANSMIT
BUFFER
;load the register
:first instruction--
;just a placeholder, it
;could be any instruction
;second instruction--
;now TXIF is valid
;load the register
;first instruction--
;reading TXIF now will
;give invalid results
 2003 Microchip Technology Inc.