STM8S103F3P6 STMicroelectronics, STM8S103F3P6 Datasheet - Page 105

• Manufacturer Part Number: STM8S103F3P6
• Description: MCU 8BIT 8KB FLASH 20-TSSOP
• Manufacturer: STMicroelectronics
• Series: STM8Sr

Specifications of STM8S103F3P6

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 640 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.95 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-TSSOP
• Processor Series: STM8S10x
• Core: STM8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWSTM8
• Development Tools By Supplier: STM8/128-MCKIT, STM8S-DISCOVERY, ST-LINK, STICE-SYS001, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Featured Product: STM32 Cortex-M3 Companion Products
• For Use With: 497-10593 - KIT STARTER FOR STM8S207/8 SER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

STM8S103K3 STM8S103F3 STM8S103F2
OPT2 alternate function remapping for STM8S103F
Do not use more than one remapping option in the same port. It is forbidden to enable both
AFR1 and AFR0.
AFR3
AFR4
AFR5
(check only one option)
AFR6
(check only one option)
AFR7
AFR0
(check only one option)
AFR1
(check only one option)
AFR2
AFR3
(check only one option)
AFR4
(check only one option)
AFR5
AFR6
AFR7
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port C5 alternate function = TIM2_CH1, port C6 alternate
function = TIM1_CH1, and port C7 alternate function =
TIM1_CH2
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port A3 alternate function = SPI_NSS and port D2 alternate
function = TIM2_CH3
Reserved
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port C3 alternate function = TLI
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port B4 alternate function = ADC_ETR and port B5 alternate
function = TIM1_BKIN
Reserved
Reserved
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port C3 alternate function = TIM1_CH1N and port C4
alternate function = TIM1_CH2N
Reserved
Reserved
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port D0 alternate function = CLK_CCO
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port D7 alternate function = TIM1_CH4
Reserved
DocID15441 Rev 6
Ordering information
105/113