STM32F101VCT6 STMicroelectronics, STM32F101VCT6 Datasheet - Page 17
![MCU ARM 32BIT 256K FLASH 100LQFP](/photos/12/15/121536/stmicroelectronics-_100-lqfp_sml.jpg)
STM32F101VCT6
Manufacturer Part Number
STM32F101VCT6
Description
MCU ARM 32BIT 256K FLASH 100LQFP
Manufacturer
STMicroelectronics
Series
STM32r
Datasheet
1.STM32F101RET6.pdf
(106 pages)
Specifications of STM32F101VCT6
Core Processor
ARM® Cortex-M3™
Core Size
32-Bit
Speed
36MHz
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT
Number Of I /o
80
Program Memory Size
256KB (256K x 8)
Program Memory Type
FLASH
Ram Size
32K x 8
Voltage - Supply (vcc/vdd)
2 V ~ 3.6 V
Data Converters
A/D 16x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
100-LQFP
Processor Series
STM32F101x
Core
ARM Cortex M3
Data Bus Width
32 bit
Data Ram Size
32 KB
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
36 MHz
Number Of Programmable I/os
80
Number Of Timers
6
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
EWARM, EWARM-BL, MDK-ARM, RL-ARM, ULINK2
Development Tools By Supplier
STM3210E-EVAL
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 16 Channel
On-chip Dac
12 bit, 2 Channel
Featured Product
STM32 Cortex-M3 Companion Products
Eeprom Size
-
A/d Bit Size
12 bit
A/d Channels Available
16
Height
1.4 mm
Length
14 mm
Supply Voltage (max)
3.6 V
Supply Voltage (min)
2 V
Width
14 mm
For Use With
497-10030 - STARTER KIT FOR STM32KSDKSTM32-PL - KIT IAR KICKSTART STM32 CORTEXM3497-8512 - KIT STARTER FOR STM32F10XE MCU497-8505 - KIT STARTER FOR STM32F10XE MCU497-6438 - BOARD EVALUTION FOR STM32 512K497-6289 - KIT PERFORMANCE STICK FOR STM32MCBSTM32UME - BOARD EVAL MCBSTM32 + ULINK-MEMCBSTM32U - BOARD EVAL MCBSTM32 + ULINK2497-6053 - KIT STARTER FOR STM32497-6052 - KIT STARTER FOR STM32497-6050 - KIT STARTER FOR STM32497-6049 - KIT EVALUATION LOW COST STM32497-6048 - BOARD EVALUATION FOR STM32497-6047 - KIT DEVELOPMENT FOR STM32
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Details
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
STM32F101VCT6
Manufacturer:
STMicroelectronics
Quantity:
20 000
Company:
Part Number:
STM32F101VCT6
Manufacturer:
STMicroelectronics
Quantity:
10 000
Part Number:
STM32F101VCT6
Manufacturer:
ST
Quantity:
20 000
Company:
Part Number:
STM32F101VCT6TR
Manufacturer:
STMicroelectronics
Quantity:
10 000
STM32F101xC, STM32F101xD, STM32F101xE
2.3.11
2.3.12
2.3.13
2.3.14
Power supply schemes
●
●
●
For more details on how to connect power pins, refer to
Power supply supervisor
The device has an integrated power-on reset (POR)/power-down reset (PDR) circuitry. It is
always active, and ensures proper operation starting from/down to 2 V. The device remains
in reset mode when V
external reset circuit.
The device features an embedded programmable voltage detector (PVD) that monitors the
V
generated when V
than the V
message and/or put the MCU into a safe state. The PVD is enabled by software. Refer to
Table 12: Embedded reset and power control block characteristics
V
Voltage regulator
The regulator has three operation modes: main (MR), low power (LPR) and power down.
●
●
●
This regulator is always enabled after reset. It is disabled in Standby mode.
Low-power modes
The STM32F101xC, STM32F101xD and STM32F101xE access line supports three low-
power modes to achieve the best compromise between low power consumption, short
startup time and available wakeup sources:
●
●
DD
POR/PDR
/V
V
Provided externally through V
V
and PLL (minimum voltage to be applied to V
and V
V
registers (through power switch) when V
MR is used in the nominal regulation mode (Run)
LPR is used in the Stop modes.
Power down is used in Standby mode: the regulator output is in high impedance: the
kernel circuitry is powered down, inducing zero consumption (but the contents of the
registers and SRAM are lost)
Sleep mode
In Sleep mode, only the CPU is stopped. All peripherals continue to operate and can
wake up the CPU when an interrupt/event occurs.
Stop mode
Stop mode achieves the lowest power consumption while retaining the content of
SRAM and registers. All clocks in the 1.8 V domain are stopped, the PLL, the HSI RC
and the HSE crystal oscillators are disabled. The voltage regulator can also be put
either in normal or in low power mode.
DD
SSA
BAT
DDA
= 2.0 to 3.6 V: external power supply for I/Os and the internal regulator.
, V
= 1.8 to 3.6 V: power supply for RTC, external clock 32 kHz oscillator and backup
PVD
and V
power supply and compares it to the V
SSA
DDA
threshold. The interrupt service routine can then generate a warning
must be connected to V
PVD
= 2.0 to 3.6 V: external analog power supplies for ADC, Reset blocks, RCs
DD
.
/V
DD
DDA
is below a specified threshold, V
drops below the V
Doc ID 14610 Rev 7
DD
pins.
DD
and V
DD
PVD
SS
is not present.
PVD
threshold and/or when V
DDA
, respectively.
threshold. An interrupt can be
is 2.4 V when the ADC is used). V
Figure 9: Power supply
POR/PDR
, without the need for an
for the values of
DD
/V
DDA
Description
scheme.
is higher
17/106
DDA