Z86E4412VSG Zilog, Z86E4412VSG Datasheet - Page 27

• Manufacturer Part Number: Z86E4412VSG
• Description: IC MICROCONTROLLER 16K 44-PLCC
• Manufacturer: Zilog
• Series: Z8®r

Specifications of Z86E4412VSG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 12MHz
• Connectivity: EBI/EMI
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: OTP
• Ram Size: 236 x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-LCC (J-Lead)
• Processor Series: Z86E4xx
• Core: Z8
• Data Bus Width: 8 bit
• Data Ram Size: 237 B
• Maximum Clock Frequency: 12 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 2
• Operating Supply Voltage: 3.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z86E4400ZDV, Z86E4400ZDP, Z86E4400ZDF, Z86E3400ZDV, Z86E3400ZDS, Z86E3400ZDP, Z86C4001ZDV
• Minimum Operating Temperature: 0 C
• For Use With: 309-1042 - ADAPTER 44-PLCC ZIF TO 44-PLCC309-1041 - ADAPTER 44-PLCC TO 44-PLCC309-1038 - ADAPTER 44-PLCC ZIF TO 40-DIP309-1037 - ADAPTER 44-PLCC TO 40-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-3981; Z86E4412VSG

Zilog
Port 0 (P07-P00). Port 0 is an 8-bit, bidirectional, CMOS-
compatible I/O port. These eight I/O lines can be config-
ured under software control as a nibble I/O port, or as an
address port for interfacing external memory. The input
buffers are Schmitt-triggered and nibble programmed. Ei-
ther nibble output that can be globally programmed as
push-pull or open-drain. Low EMI output buffers can be
globally programmed by the software. Port 0 can be placed
under handshake control. In Handshake Mode, Port 3
lines P32 and P35 are used as handshake control lines.
The handshake direction is determined by the configura-
tion (input or output) assigned to Port 0's upper nibble. The
lower nibble must have the same direction as the upper
nibble.
DS97Z8X1500
OEN
Out
Open-Drain
In
1.5
MCU
2.3V Hysteresis
Figure 18. Port 0 Configuration
P R E L I M I N A R Y
4
4
R
For external memory references, Port 0 provides address
bits A11-A8 (lower nibble) or A15-A8 (lower and upper nib-
ble) depending on the required address space. If the ad-
dress range requires 12 bits or less, the upper nibble of
Port 0 can be programmed independently as I/O while the
lower nibble is used for addressing. If one or both nibbles
are needed for I/O operation, they must be configured by
writing to the Port 0 mode register. In ROMless mode, after
a hardware reset, Port 0 is configured as address lines
A15-A8, and extended timing is set to accommodate slow
memory access. The initialization routine can include re-
configuration to eliminate this extended timing mode. In
ROM mode, Port 0 is defined as input after reset.
Port 0 can be set in the High-Impedance Mode if selected
as an address output state, along with Port 1 and the con-
trol signals /AS, /DS, and R//W (Figure 18).
500 k
Handshake Controls
/DAV0 and RDY0
(P32 and P35)
Port 0 (I/O)
CMOS Z8 OTP Microcontrollers
Auto Latch
Z86E33/733/E34/E43/743/E44
PAD
27
1