C8051F044-GQR Silicon Laboratories Inc, C8051F044-GQR Datasheet - Page 138

• Manufacturer Part Number: C8051F044-GQR
• Description: IC 8051 MCU 64K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F04xr

Specifications of C8051F044-GQR

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 64
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

C8051F040/1/2/3/4/5/6/7
While in the ADC2 ISR, a PCA interrupt occurs. Recall the PCA interrupt is configured as a high priority
interrupt, while the ADC2 interrupt is configured as a low priority interrupt. Thus, the CIP-51 will now vector
to the high priority PCA ISR. Upon doing so, the CIP-51 will automatically place the SFR page needed to
access the PCA’s special function registers into the SFRPAGE register, SFR Page 0x00. The value that
was in the SFRPAGE register before the PCA interrupt (SFR Page 2 for ADC2) is pushed down the stack
into SFRNEXT. Likewise, the value that was in the SFRNEXT register before the PCA interrupt (in this
case SFR Page 0x0F for Port 5) is pushed down to the SFRLAST register, the “bottom” of the stack. Note
that a value stored in SFRLAST (via a previous software write to the SFRLAST register) will be overwritten.
See Figure 12.6 below.
138
Figure 12.5. SFR Page Stack After ADC2 Window Comparator Interrupt Occurs
SFRPAGE
SFRNEXT
pushed to
SFRPAGE on ADC2
pushed on stack in
SFR Page 0x02
(ADC2)
(Port 5)
Automatically
0x0F
0x02
interrupt
Rev. 1.5
SFRPAGE
SFRNEXT
SFRLAST