MC68CK16Z1CAG16 Freescale Semiconductor, MC68CK16Z1CAG16 Datasheet - Page 258

• Manufacturer Part Number: MC68CK16Z1CAG16
• Description: IC MICROPROCESSOR 16BIT 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC16r

Specifications of MC68CK16Z1CAG16

• Core Processor: CPU16
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Controller Family/series: 68HC16
• No. Of I/o's: 16
• Ram Memory Size: 1KB
• Cpu Speed: 16MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Processor Series: HC16Z
• Core: CPU16
• Data Bus Width: 16 bit
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 11
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 144LQFP
• Family Name: HC16
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

10.4.5.2 Serial Formats
10.4.5.3 Baud Clock
10-18
All data frames must have a start bit and at least one stop bit. Receiving and transmit-
ting devices must use the same data frame format. The SCI provides hardware sup-
port for both 10-bit and 11-bit frames. The M bit in SCCR1 specifies the number of bits
per frame.
The most common data frame format for NRZ serial interfaces is one start bit, eight
data bits (LSB first), and one stop bit; a total of ten bits. The most common 11-bit data
frame contains one start bit, eight data bits, a parity or control bit, and one stop bit.
Ten-bit and eleven-bit frames are shown in
The SCI baud rate is programmed by writing a 13-bit value to the SCBR field in SCI
control register zero (SCCR0). The baud rate is derived from the MCU system clock
by a modulus counter. Writing a value of zero to SCBR[12:0] disables the baud rate
generator. Baud rate is calculated as follows:
where SCBR[12:0] is in the range {1, 2, 3, ..., 8191}.
The SCI receiver operates asynchronously. An internal clock is necessary to synchro-
nize with an incoming data stream. The SCI baud rate generator produces a receive
time sampling clock with a frequency 16 times that of the SCI baud rate. The SCI de-
termines the position of bit boundaries from transitions within the received waveform,
and adjusts sampling points to the proper positions within the bit period.
Start
Start
1
1
1
1
1
MULTICHANNEL COMMUNICATION INTERFACE
Freescale Semiconductor, Inc.
For More Information On This Product,
SCBR[12:0]
Table 10-6 Serial Frame Formats
SCI Baud Rate
Go to: www.freescale.com
Data
Data
7
7
8
7
8
10-Bit Frames
11-Bit Frames
=
-------------------------------------------------------------------------- -
32 SCI Baud Rate Desired
Parity/Control
Parity/Control
=
or
Table
------------------------------------------- -
32 SCBR[12:0]
—
—
1
1
1
10-6.
f
sys
f
sys
Stop
Stop
2
1
1
2
1
M68HC16 Z SERIES
USER’S MANUAL