MCF5212CAE66 Freescale Semiconductor, MCF5212CAE66 Datasheet - Page 54

• Manufacturer Part Number: MCF5212CAE66
• Description: IC MCU 256K FLASH 66MHZ 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5212CAE66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 55
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Processor Series: MCF521x
• Core: ColdFire V2
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, QSPI, UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 10
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: M52210DEMO, M52211EVB
• Minimum Operating Temperature: 0 C
• On-chip Adc: 12 bit, 8 Channel
• For Use With: M5211DEMO - KIT DEMO FOR MCF5211
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Revision History
4
54
Revision
2
3
4
Revision History
• Formatting, layout, spelling, and grammar corrections.
• Added revision history.
• Corrected signal names in block diagram to match those in signal description table.
• Added the following footnote to the MCF5211 FlexCAN entry:
• Added an entry for standby voltage (V
• Deleted the PSTCLK cycle time row in the “Debug AC timing specifications” table.
• Changed the frequency above the “Min” and “Max” column headings in the “Debug AC timing
• Changed the minimum value for SNR, THD, SFDR, and SINAD in the “ADC parameters” table (was
• In the “Pin Functions by Primary and Alternate Purpose” table, changed the value in the
• Added values for I
• Added load test condition information to the “General Purpose I/O Timing” section.
• Deleted the “80 MHz (Peak)” column from the “Current Consumption in Low-Power Mode” table.
• In the “Typical Active Current Consumption Specifications” table, changed the typical active (SRAM)
• Changed the I
• Changed the I
• Formatting, layout, spelling, and grammar corrections.
• Synchronized the “Pin Functions by Primary and Alternate Purpose” table in this document and the
• Restructured the part number summary table to include full orderable parts, and changed its name (was
• Updated the family configurations table to show that FlexCAN is not available on the MCF5212.
• Added specifications for V
• In
• Added EzPort timings.
• Updated clocking features.
specifications” table (was 166 MHz, is 66/80 MHz).
TBD, is “—”).
“Pull-up/pull-down” column for IRQ2-IRQ6 (was “—”, is “pull-up”).
and peak I
TBD, are “—”) and added an explanatory footnote referring to the MCF5213 Device Errata.
are 16 mA for normal operation and 50 μA for low-power stop).
reference manual.
“Part Number Summary”, is “Orderable Part Number Summary”).
of V
Table
REFH
34, changed the Min value of V
to V
DD
DDA
values for the 1 MHz core & I/O entry (were TBD, are “—”).
STBY
DDA
“FlexCAN is available on the MCF5211 only in the 64 QFN package.”
.
OH
MCF5213 ColdFire Microcontroller, Rev. 4
values In the “Typical Active Current Consumption Specifications” table (were TBD,
values In the “Typical Active Current Consumption Specifications” table (were 0 or
and I
Table 39. Revision History
LVD
OL
to the “DC electrical specifications” table.
and V
LVDHYS
STBY
REFL
) to the “DC electrical specifications” table.
Description
to the “DC electrical specifications” table.
to V
SSA
, the Max value of V
REFL
to V
Freescale Semiconductor
SSA
, and the Min value