DF2367VF33V Renesas Electronics America, DF2367VF33V Datasheet - Page 295

• Manufacturer Part Number: DF2367VF33V
• Description: IC H8S/2367 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2367VF33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit
5
Bit Name
DTME0
Initial Value
0
R/W
R/W
Description
Data Transfer Master Enable 0
Together with the DTE0 bit, this bit controls
enabling or disabling of data transfer on channel
0. When both the DTME0 bit and DTE0 bit are
set to 1, transfer is enabled for channel 0.
If channel 0 is in the middle of a burst mode
transfer when an NMI interrupt is generated, the
DTME0 bit is cleared, the transfer is interrupted,
and bus mastership passes to the CPU. When
the DTME0 bit is subsequently set to 1 again,
the interrupted transfer is resumed. In block
transfer mode, however, the DTME0 bit is not
cleared by an NMI interrupt, and transfer is not
interrupted.
[Clearing conditions]
•
•
•
[Setting condition]
When 1 is written to DTME0 after reading
DTME0 = 0
When initialization is performed
When NMI is input in burst mode
When 0 is written to the DTME0 bit
Rev.6.00 Mar. 18, 2009 Page 235 of 980
Section 7 DMA Controller (DMAC)
REJ09B0050-0600