PIC12C671T-04I/MF Microchip Technology, PIC12C671T-04I/MF Datasheet - Page 576

• Manufacturer Part Number: PIC12C671T-04I/MF
• Description: IC MCU OTP 1KX14 W/AD 8-DFN
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671T-04I/MF

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164324 - MODULE SKT FOR MPLAB 8DFN/16QFNXLT08DFN2 - SOCKET TRANSITION ICE 14DIP/8DFNXLT08DFN - SOCKET TRANSITION ICE 8DFNAC164032 - ADAPTER PICSTART PLUS 8DFN/DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
30.5
DS31030A-page 30-6
Device Current Specifications
I
taken with all I/O as inputs, either pulled high or low. That is, there are no floating inputs, nor are
any pins driving an output (with a load).
I
referred to as power-down current. These tests are taken with all I/O as inputs, either pulled high
or low. That is, there are no floating inputs, nor are any pins driving an output (with a load), weak
pull-ups are disabled.
A device may have certain features and modules that can operate while the device is in sleep
mode. Some on these modules are:
• Watchdog Timer (WDT)
• Brown-out Reset (BOR) circuitry
• Timer1
• Analog to Digital converter
• LCD module
• Comparators
• Voltage Reference
When all features are disabled, the device will consume the lowest possible current (the leakage
current). If any of these features are operating while the device is in sleep, a higher current will
occur. The difference between the lowest power mode (everything off) at only that one feature
enabled (such as the WDT) is what we call the Module Differential Current. If more then one
feature is enabled then the expected current can easily be calculated as: the base current (every-
thing disabled and in sleep mode) plus all Module Differential Currents (delta currents).
Example 30-1
WDT and Timer1 oscillator enabled.
Example 30-1:
DD
PD
Base Current
WDT Delta Current
Timer1 Delta Current
Total Sleep Current
is the current (I) that the device consumes when the device is in operating mode. This test is
is the current (I) that the device consumes when the device is in sleep mode (power-down),
shows an example of calculating the typical currents for a device at 5V, with the
I
PD
Calculations with WDT and Timer1 Oscillator Enabled (@ 5V)
14 nA
14 A
22 A
36 A
; Device leakage current
; 14 A - 14 nA = 14 A
; 22 A - 14 nA = 22 A
;
1997 Microchip Technology Inc.