PIC12C671T-04I/MF Microchip Technology, PIC12C671T-04I/MF Datasheet - Page 92

• Manufacturer Part Number: PIC12C671T-04I/MF
• Description: IC MCU OTP 1KX14 W/AD 8-DFN
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671T-04I/MF

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164324 - MODULE SKT FOR MPLAB 8DFN/16QFNXLT08DFN2 - SOCKET TRANSITION ICE 14DIP/8DFNXLT08DFN - SOCKET TRANSITION ICE 8DFNAC164032 - ADAPTER PICSTART PLUS 8DFN/DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
5.9
DS31005A-page 5-10
Design Tips
Question 1:
Answer 1:
1.
2.
Question 2:
Answer 2:
if the STATUS register is the destination for an instruction that affects the Z, DC, or C bits, the
write to these bits is disabled. These bits are set or cleared based on device logic. Therefore, to
modify bits in the STATUS register it is recommended to use the BCF and BSF instructions.
The destination of the instruction may be specifying the W register (d = 0) instead of the
file register (d = 1).
The register bank select bits (RP1:RP0 or IRP) may not be properly selected. Also if inter-
rupts are used, the register bank select bits may not be properly restored when exiting the
interrupt handler.
My program algorithm does not seem to function correctly.
I cannot seem to modify the STATUS register flags.
1997 Microchip Technology Inc.