DSPIC30F5016-20I/PT Microchip Technology, DSPIC30F5016-20I/PT Datasheet - Page 29
![no-image](/images/manufacturer_photos/0/4/439/microchip_technology_sml.jpg)
DSPIC30F5016-20I/PT
Manufacturer Part Number
DSPIC30F5016-20I/PT
Description
IC DSPIC MCU/DSP 66K 80TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 30Fr
Datasheets
1.DSPIC30F2011-20ISO.pdf
(66 pages)
2.DSPIC30F5011T-20IPT.pdf
(34 pages)
3.DSPIC30F6010T-20IPF.pdf
(6 pages)
4.DSPIC30F5016-20IPT.pdf
(100 pages)
Specifications of DSPIC30F5016-20I/PT
Core Processor
dsPIC
Core Size
16-Bit
Speed
20 MIPS
Connectivity
CAN, I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
Number Of I /o
68
Program Memory Size
66KB (22K x 24)
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 16x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
80-TFQFP
For Use With
AC164320 - MODULE SKT MPLAB PM3 80TQFPAC30F007 - MODULE SKT FOR DSPIC30F 80TQFP
Lead Free Status / RoHS Status
Request inventory verification / Request inventory verification
Other names
DSPIC30F501620IPT
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DSPIC30F5016-20I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
8.5.9
The ERASEP command erases the specified number of
rows of code memory from the specified base address.
The specified base address must be a multiple of 0x40.
Once the erase is performed, all targeted words of
code memory contain 0xFFFFFF.
Expected Response (2 words):
0x1900
0x0002
© 2010 Microchip Technology Inc.
15
Opcode
Length
Num_Rows
Addr_MSB
Addr_LS
Note:
Opcode
Field
Num_Rows
12 11
ERASEP COMMAND
The ERASEP command cannot be used to
erase the Configuration registers or
device ID. Code-protect Configuration
registers can only be erased with the
ERASEB command, while the device ID is
read-only.
0x9
0x3
Number of rows to erase
MSB of 24-bit base address
LS 16 bits of 24-bit base address
Addr_LS
8 7
Description
Length
Addr_MSB
0
8.5.10
The QBLANK command queries the programming exec-
utive to determine if the contents of code memory and
data EEPROM are blank (contains all ‘1’s). The size of
code memory and data EEPROM to check must be
specified in the command.
The Blank Check for code memory begins at 0x0 and
advances toward larger addresses for the specified
number of instruction words. The Blank Check for data
EEPROM begins at 0x7FFFFE and advances toward
smaller addresses for the specified number of data
words.
QBLANK returns a QE_Code of 0xF0 if the specified
code memory and data EEPROM are blank.
Otherwise, QBLANK returns a QE_Code of 0x0F.
Expected Response (2 words for blank device):
0x1AF0
0x0002
Expected Response (2 words for non-blank device):
0x1A0F
0x0002
15
Opcode
Length
PSize
Reserved
DSize
Note:
Reserved
Opcode
Field
12 11
QBLANK COMMAND
The QBLANK command does not check
the system Configuration registers. The
READD command must be used to deter-
mine the state of the Configuration
registers.
0xA
0x3
Length of program memory to check
(in 24-bit words), max of 49152
0x0
Length of data memory to check
(in 16-bit words), max of 2048
PSize
Description
Length
DSize
DS70102K-page 29
0