AT89LP2052-16XU Atmel, AT89LP2052-16XU Datasheet - Page 27

• Manufacturer Part Number: AT89LP2052-16XU
• Description: IC 8051 MCU FLASH 2K 20TSSOP
• Manufacturer: Atmel
• Series: 89LPr

Specifications of AT89LP2052-16XU

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

Table 16-1.
3547J–MICRO–10/09
Bit
Symbol
TF1
TR1
TF0
TR0
IE1
IT1
IE0
IT0
TCON = 88H
Bit Addressable
TF1
Function
Timer 1 overflow flag. Set by hardware on Timer/Counter overflow. Cleared by hardware when the processor vectors to
interrupt routine.
Timer 1 run control bit. Set/cleared by software to turn Timer/Counter on/off.
Timer 0 overflow flag. Set by hardware on Timer/Counter overflow. Cleared by hardware when the processor vectors to
interrupt routine.
Timer 0 run control bit. Set/cleared by software to turn Timer/Counter on/off.
Interrupt 1 flag. When IT1 is set, IE1 is set by hardware when the external interrupt falling edge is detected, and is cleared
by hardware when the CPU vectors to the interrupt routine. When IT1 is cleared, IE1 is sampled and inverted from the
external interrupt pin. The flag will be set or cleared by hardware depending on the state of P3.3.
Interrupt 1 type control bit. Set/cleared by software to specify falling edge/low level triggered external interrupts.
Interrupt 0 flag. When IT0 is set, IE0 is set by hardware when the external interrupt falling edge is detected, and is cleared
by hardware when the CPU vectors to the interrupt routine. When IT0 is cleared, IE0 is sampled and inverted from the
external interrupt pin. The flag will be set or cleared by hardware depending on the state of P3.2.
Interrupt 0 type control bit. Set/cleared by software to specify falling edge/low level triggered external interrupts.
7
TCON
– Timer/Counter Control Register
TR1
6
TF0
5
TR0
4
IE1
3
IT1
2
AT89LP2052/LP4052
Reset Value = 0000 0000B
IE0
1
IT0
0
27