AT91SAM7S64-MU Atmel, AT91SAM7S64-MU Datasheet - Page 26
![IC ARM7 MCU FLASH 64K 64QFN](/photos/12/13/121326/313-64-qfn_sml.jpg)
AT91SAM7S64-MU
Manufacturer Part Number
AT91SAM7S64-MU
Description
IC ARM7 MCU FLASH 64K 64QFN
Manufacturer
Atmel
Series
AT91SAMr
Specifications of AT91SAM7S64-MU
Core Processor
ARM7
Core Size
16/32-Bit
Speed
55MHz
Connectivity
I²C, SPI, SSC, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
32
Program Memory Size
64KB (64K x 8)
Program Memory Type
FLASH
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
1.65 V ~ 1.95 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-VQFN
For Use With
AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
9. System Controller
26
AT91SAM7S Series Summary
The SAM-BA Boot Assistant is a default Boot Program that provides an easy way to program in
situ the on-chip Flash memory.
The SAM-BA Boot Assistant supports serial communication through the DBGU or through the
USB Device Port. (The AT91SAM7S32/16 have no USB Device Port.)
The SAM-BA Boot provides an interface with SAM-BA Graphic User Interface (GUI).
The System Controller manages all vital blocks of the microcontroller: interrupts, clocks, power,
time, debug and reset.
The System Controller peripherals are all mapped to the highest 4 Kbytes of address space,
between addresses 0xFFFF F000 and 0xFFFF FFFF.
Figure 9-1 on page 27
Block Diagrams.
Figure 8-1 on page 20
peripherals. Note that the memory controller configuration user interface is also mapped within
this address space.
• Communication through the DBGU supports a wide range of crystals from 3 to 20 MHz via
• Communication through the USB Device Port is limited to an 18.432 MHz crystal. (
software auto-detection.
shows the mapping of the of the User Interface of the System Controller
and
Figure 9-2 on page 28
show the product specific System Controller
6175IS–ATARM–30-Aug-10