C8051F236 Silicon Laboratories Inc, C8051F236 Datasheet - Page 81

• Manufacturer Part Number: C8051F236
• Description: IC 8051 MCU 8K FLASH 48TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F2xxr

Specifications of C8051F236

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 32
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
PCP1R
R/W
Bit7
PCP1R: Comparator 1 (CP1) Rising Interrupt Priority Control.
This bit sets the priority of the CP1 interrupt.
0: CP1 rising interrupt set to low priority level.
1: CP1 rising interrupt set to high priority level.
PCP1F: Comparator 1 (CP1) Falling Interrupt Priority Control.
This bit sets the priority of the CP1 interrupt.
0: CP1 falling interrupt set to low priority level.
1: CP1 falling interrupt set to high priority level.
PCP0R: Comparator 0 (CP0) Rising Interrupt Priority Control.
This bit sets the priority of the CP0 interrupt.
0: CP0 rising interrupt set to low priority level.
1: CP0 rising interrupt set to high priority level.
PCP0F: Comparator 0 (CP0) Falling Interrupt Priority Control.
This bit sets the priority of the CP0 interrupt.
0: CP0 falling interrupt set to low priority level.
1: CP0 falling interrupt set to high priority level.
Reserved. Read = 0, Write = don't care.
PWADC0: Analog-to-Digital Converter 0 window compare (ADC0) Interrupt Priority Control.
This bit sets the priority of the ADC0 window compare interrupt.
0: ADC0 window compare interrupt set to low priority level.
1: ADC0 window compare interrupt set to high priority level.
UNUSED. Read = 0, Write = don't care.
PSPI0: Serial Peripheral Interface 0 Interrupt Priority Control.
This bit sets the priority of the SPI0 interrupt.
0: SPI0 interrupt set to low priority level.
1: SPI0 interrupt set to high priority level.
PCP1F
R/W
Bit6
SFR Definition 9.12. EIP1: Extended Interrupt Priority 1
PCP0R
R/W
Bit5
PCP0F
R/W
Bit4
Rev. 1.6
R/W
Bit3
-
PWADC0
R/W
Bit2
R/W
Bit1
-
C8051F2xx
PSPI0
R/W
Bit0
SFR Address:
Reset Value
00000000
0xF6
81