MCHC11F1CFNE3 Freescale Semiconductor, MCHC11F1CFNE3 Datasheet - Page 39

• Manufacturer Part Number: MCHC11F1CFNE3
• Description: IC MCU 8BIT 1K RAM 68-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MCHC11F1CFNE3

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 30
• Program Memory Type: ROMless
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.75 V ~ 5.25 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 68-PLCC
• A/d Inputs: 8-Channel, 8-Bit
• Eeprom Memory: 512 Bytes
• Input Output: 30
• Interface: SCI/SPI
• Memory Type: EPROM
• Number Of Bits: 8
• Package Type: 68-pin PLCC
• Programmable Memory: 0 Bytes
• Timers: 3-16-bit
• Voltage, Range: 3-5.5 V
• Controller Family/series: 68HC11
• No. Of I/o's: 30
• Eeprom Memory Size: 512Byte
• Ram Memory Size: 1KB
• Cpu Speed: 3MHz
• No. Of Timers: 1
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Processor Series: HC11F
• Core: HC11
• Data Bus Width: 8 bit
• Program Memory Size: 512 B
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 3 MHz
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Size: -
• Lead Free Status / Rohs Status: RoHS Compliant part

4.1 Operating Modes
4.1.1 Single-Chip Operating Mode
4.1.2 Expanded Operating Mode
4.1.3 Special Test Mode
4.1.4 Special Bootstrap Mode
TECHNICAL DATA
This section contains information about the modes that define MC68HC11F1 operat-
ing conditions, and about the on-chip memory that allows the MCU to be configured
for various applications.
The values of the mode select inputs MODB and MODA during reset determine the
operating mode. Single chip and expanded modes are the normal modes. In single-
chip mode only on-board resources are available. Expanded mode, however, allows
access to external memory or peripheral devices. Each of these two normal modes is
paired with a special mode. Bootstrap mode, a variation of the single-chip mode, exe-
cutes a bootloader program from an internal bootstrap ROM. Test mode allows privi-
leged access to internal resources.
In single-chip operating mode, the MC68HC11F1 has no external address or data bus.
Ports B, C, and F are available for general-purpose I/O.
In expanded operating mode, the MCU can access a 64-Kbyte physical address
space. The address space includes the same on-chip memory addresses used for sin-
gle-chip mode, in addition to external memory and peripheral devices.
The expansion bus is made up of ports B, C, F and the R/W signal. In expanded mode,
high order address bits are output on the port B pins, low order address bits on the port
F pins, and the data bus on port C. The R/W pin indicates the direction of data transfer
on the port C bus.
Special test mode, a variation of the expanded mode, is primarily used during Motor-
ola's internal production testing; however, it is accessible for programming the CON-
FIG register, programming calibration data into EEPROM, and supporting emulation
and debugging during development.
Bootstrap mode is a special variation of the single-chip mode. Bootstrap mode allows
special-purpose programs to be entered into internal RAM. When boot mode is select-
ed at reset, a small bootstrap ROM becomes present in the memory map. Reset and
interrupt vectors are located in bootstrap ROM at $BFC0–$BFFF. The MCU fetches
the reset vector, then executes the bootloader.
SECTION 4OPERATING MODES AND ON-CHIP MEMORY
Freescale Semiconductor, Inc.
OPERATING MODES AND ON-CHIP MEMORY
For More Information On This Product,
Go to: www.freescale.com
4-1