CS3011-ISZ Cirrus Logic Inc, CS3011-ISZ Datasheet - Page 12

• Manufacturer Part Number: CS3011-ISZ
• Description: IC OPAMP SGL PREC LV 8-SOIC
• Manufacturer: Cirrus Logic Inc

Specifications of CS3011-ISZ

• Amplifier Type: Instrumentation
• Number Of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 2 V/µs
• Current - Input Bias: 50pA
• Voltage - Input Offset: 10µV
• Current - Supply: 900µA
• Voltage - Supply, Single/dual (±): 2.7 V ~ 6.7 V, ±1.35 V ~ 3.35 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC
• Number Of Channels: 1
• Voltage Gain Db: 300 dB
• Common Mode Rejection Ratio (min): 115 dB
• Input Offset Voltage: 0.01 mV
• Operating Supply Voltage: 2.7 V to 6.7 V
• Supply Current: 0.9 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Dual Supply Voltage: +/- 3.35 V
• Minimum Operating Temperature: - 40 C
• For Use With: 598-1495 - BOARD EVAL OPAMP FOR CS30XX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output / Channel: -
• -3db Bandwidth: -
• Gain Bandwidth Product: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1142-5

The loop gain plot shown in
the unity gain configuration, and indicates how this
is mo dified when using the amplifier in a hig her
gain configuration with compensation. If it is config-
ured for higher gain, for example, 60 dB, the x– axis
will move up by 60 dB (line B). Capacitor C2 adds
a zero and a pole. The modified plot indicates the
effects of introducing the pole and zero due to ca-
pacitor C2 . The pole can be located at any fre-
quency higher than the hand-over frequency, the
zero has to be at a frequency lower than the hand-
over freque ncy so as to provide ade quate ga in
12
Figure 17. Loop Gain Plot: Unity Gain and with Pole-Zero Compensation
Figure 17
i llustrates
-20 dB/dec
FREQUENCY
-100 dB/dec
25 kHz
50kHz
X
margin. The separation between the pole and the
zero is governed by the closed loop gain. The zero
(z
cade and –80 dB/decade slopes. The point X in the
figure should be at closed loop gain plus 20 dB
gain margin. The value for C2 = 1/(2πR1p1). Us-
ing p1 = 500 kHz works very well and is indepen-
dent of ga in. As the closed loop ga in is change d,
the zero location is also modified if R1 remains
fixed. Cap acitor C2 ca n be incre ased in value to
limit the amplifier’s rising noise above 1 kHz.
z
Margin
500 kHz
1
1
-80 dB/dec
) occurs at the intersection o f the –100 dB/de-
1MHz
2.4 MHz
Desired Closed
5MHz
Loop Gain
p
1
B
CS3012
CS3011
DS597F6