OP490GPZ Analog Devices Inc, OP490GPZ Datasheet - Page 5

• Manufacturer Part Number: OP490GPZ
• Description: IC OPAMP GP 20KHZ QUAD 14DIP
• Manufacturer: Analog Devices Inc

Specifications of OP490GPZ

• Slew Rate: 0.012 V/µs
• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Gain Bandwidth Product: 20kHz
• Current - Input Bias: 4.2nA
• Voltage - Input Offset: 600µV
• Current - Supply: 60µA
• Voltage - Supply, Single/dual (±): 1.6 V ~ 36 V, ±0.8 V ~ 18 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 14-DIP (0.300", 7.62mm)
• Op Amp Type: General Purpose
• No. Of Amplifiers: 4
• Bandwidth: 20kHz
• Supply Voltage Range: ± 0.8V To ± 18V
• Amplifier Case Style: DIP
• No. Of Pins: 14
• Channel Separation: 150
• Common Mode Rejection Ratio: 120
• Current, Input Bias: 4.2 nA
• Current, Input Offset: 0.4 nA
• Current, Supply: 60 μA
• Impedance, Thermal: 33 °C/W
• Number Of Amplifiers: Quad
• Package Type: PDIP-14
• Resistance, Input: 30 Megohms (Differential), 20 Gigaohms (Common-Mode)
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Gain: 800 V/mV
• Voltage, Input: -15/13.5 V
• Voltage, Noise: 3 μV
• Voltage, Offset: 0.6 mV
• Voltage, Output, High: 4.2 V
• Voltage, Output, Low: 100 μV
• Voltage, Supply: ±15 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• Current - Output / Channel: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Digital Input Voltage
Common-Mode Input Voltage
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Junction Temperature (T
Lead Temperature (Soldering,
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
60 sec)
J
) Range
Rating
±18 V
[(V−) − 20 V] to [(V+) + 20 V]
[(V−) − 20 V] to [(V+) + 20 V]
Continuous
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
Rev. E | Page 5 of 16
THERMAL RESISTANCE
θ
specified for a device in socket for the PDIP package; θ
specified for a device soldered to a printed circuit board (PCB)
for the SOIC package.
Table 4.
Package Type
14-Lead PDIP_N (S-Suffix)
16-Lead SOIC_R (S-Suffix)
ESD CAUTION
JA
is specified for worst-case mounting conditions, that is, θ
θ
76
92
JA
θ
33
27
JC
OP490
JA
Unit
°C/W
°C/W
is
JA
is