PA241CEM Cirrus Logic Inc, PA241CEM Datasheet - Page 3

• Manufacturer Part Number: PA241CEM
• Description: OP AMP HV 350V .06A 8P TO-3 MIL
• Manufacturer: Cirrus Logic Inc
• Series: Apex Precision Power™r

Specifications of PA241CEM

• Amplifier Type: Power
• Number Of Circuits: 1
• Slew Rate: 30 V/µs
• Gain Bandwidth Product: 3MHz
• Current - Input Bias: 5pA
• Voltage - Input Offset: 25000µV
• Current - Supply: 2.2mA
• Current - Output / Channel: 120mA
• Voltage - Supply, Single/dual (±): 100 V ~ 350 V, ±50 V ~ 175 V
• Operating Temperature: -25°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: TO-3-8
• For Use With: 598-1459 - EVALUATION KIT FRO PA241DF
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Output Type: -
• -3db Bandwidth: -
• Other names: 598-1432; PA241CEM

These are mounted directly in a print circuit board. Use a spacer
between the PCB and the heatsink to avoid short circuits.
SOCKET FOR THE CE (TO-3) PACKAGE
MS03
SOCKET FOR THE DW (10 PIN SIP) PACKAGE
MS06
0.1” centers. The strip can easily be cut to desired length.
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE [phone] • FAX [phone] • ORDERS [phone] • EMAIL [e-mail]
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
Part number MS02 consists of a package of 8 cage jacks.
Part number MS06 consists of two strips of 20 connectors on
AN PA241 REV A JANUARY 2005 © 2005 Apex Microtechnology Corp.
THERMAL WASHER FOR THE CE (TO-3) PACKAGE
TW03
NOTES:
1. Base material is aluminum, 0.002” thick. Do not allow the
2. For optimum thermal transfer, avoid abrasive handling of
3. The dry thermal compound will flow filling header to heatsink
4. Do not store unused thermal washers above 45°C.
5. A new washer must be used for each mounting.
6. Part number TW03 consists of a package of 10 washers.
7. Thermal resistance is 0.1°C/W.
washer to touch pins of the amplifier.
washers which can damage their 0.5mil thick layer of thermal
compound with which each side is coated.
voids as soon as the material reached 61°C.
3