RR0816P-4990-D-68A Susumu, RR0816P-4990-D-68A Datasheet - Page 7

• Manufacturer Part Number: RR0816P-4990-D-68A
• Description: RES 499 OHM 1/16W .5% 0603 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR0816P-4990-D-68A

• Resistance (ohms): 499
• Power (watts): 0.063W, 1/16W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.5%
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 499
• Case: 0603 (1608 metric)
• Resistance: 499 Ohms
• Power Rating: 0.0625 Watt (1/16 Watt)
• Voltage Rating: 75 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Dimensions: 0.8 mm W x 1.6 mm L x 0.4 mm H
• Product: Thin Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Details
• Other names: RR0816P-4990-D; RR0816P4990D; RR08P499DTR

TITLE:
6.2.2 Body strength
6.2.3 Resistance to soldering heat
6.2.4 Solderability
Method;
(1) Solder bath method
(2) Reflow soldering method
(3) Soldering iron method
Specification:
Method;
Specification:
Method;
The resistor shall be stored at standard atmospheric conditions for 1 hr after which the measurements shall
be made.
For other procedures, refer to IEC 60115-1, Sub-clause 4.18.
A new uniform coating of solder shall cover minimum of 95% of the surface being immersed.
A load of 10 N {1.02kgf} using a R0.5 pressure rod shall be applied
to the center in the direction of arrow and held for 10 s.
Change in resistance : ±(0.5%+0.05Ω)
Without mechanical damage.
Electrical characteristics shall be satisfied.
Temperature of solder
Duration of immersion
For other procedures, refer to IEC 60115-1, Sub-clause 4.17.
Specification;
The heating apparatus shall be the upper-heated oven and the temperature shall be board surface
temperature.
Preheat
Temperature
Peak temperature
Temperature
Bit temperature
Time
Change in resistance
Without mechanical damage such as breaks.
Chip resistor RR0816 series
Specification for
3 +1／0 s.
:
350±5deg C
100∼110deg C
260±5deg C
220deg C over
270±5deg C
2±0.5 s.
235±5deg C
245±5deg C
±(0.5%+0.05Ω)
10 sec. or less
60 s. max.
SUSUMU
(Solder alloy: Sn-37Pb)
CO.,LTD
(Solder alloy: Sn-3Ag-0.5Cu)
10±1 s.
30 s.
SPEC.NO:
RR00-1098
1/2
R0.5
Ｌ
Ｌ
Pressurizing jig
Specimen
Rev. No.
0
7/16