USB-COM232-PLUS-4 FTDI, Future Technology Devices International Ltd, USB-COM232-PLUS-4 Datasheet - Page 9
![MODULE USB TO RS232 CONV QUAD HS](/photos/1/45/14518/usb-com232-plus-4_sml.jpg)
USB-COM232-PLUS-4
Manufacturer Part Number
USB-COM232-PLUS-4
Description
MODULE USB TO RS232 CONV QUAD HS
Manufacturer
FTDI, Future Technology Devices International Ltd
Series
USB-COM-Plusr
Datasheet
1.USB-COM232-PLUS-4.pdf
(23 pages)
Specifications of USB-COM232-PLUS-4
Convert From (adapter End)
USB-miniB
Convert To (adapter End)
DE-9P Male (4)
Features
USB Hi-Speed to RS232 Serial Converter Assy, w/LEDs, 1MBaud
For Use With/related Products
Windows® 2000 or higher, Linux, Max OS X
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
768-1034
USB-COM232-PLUS-4
USB-COM232-PLUS-4
COM Port Assignment
Next, to determine which COM port has been assigned, open the Windows Device Manager from the
System Control Panel.
5) Wait while the driver is found, downloaded, and installed. This step may take a couple minutes
6) After the files are found and installed, click “Finish” to complete the installation.
7) Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB
8) When both portions of the device driver have been installed successfully, the following message
Figure 2.3 – Automatic Install
depending on the Internet speed.
Figure 2.4 - Complete Hardware Installation
device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the
COM port number. You must install the Virtual COM Port layer four times, because the USB-
COM232-PLUS4 has four Virtual COM Ports.
will appear, indicating that the device is ready.
Figure 2.5 - Hardware Ready
Copyright © 2010 Future Technology Devices International Limited
Document Reference No.: FT_000148
USB-COM232-PLUS4 Datasheet
Clearance No.: FTDI# 97
Version 1.2
8