LS7-38-2 Panduit Corp, LS7-38-2 Datasheet - Page 11

• Manufacturer Part Number: LS7-38-2
• Description: TAPE LAM 3/8"X 26.2' BLK ON CLR
• Manufacturer: Panduit Corp
• Series: PANACEA™r
• Type: Labelr

Specifications of LS7-38-2

• Label Type: Thermal Transfer
• Label Size: 0.375" x 26.2' (9.5mm x 8.0m)
• Rohs Status: Not applicable
• Color: Clear
• Label Material: Polyester
• Background Color: Clear
• Legend: Blank
• Pack Quantity: 1
• Product: LS7 Laminated Adhesive Label Tape
• Features: For flat label applications only
• Length: 314.96 in
• For Use With/related Products: Thermal Transfer Printer
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 298-1342

This lightweight and portable machine can be used anywhere by installing six (6) AA (AM3,
LR6) alkaline batteries. When changing the batteries, always replace all six at the same
time.
To change the batteries:
1
2
3
4
8
Remove the back cover by pressing in on the rough area at the top end of the machine
and pulling off the cover. Pulling off the back cover lifts up the tape release lever.
If batteries are already installed, remove them.
Insert six new batteries, making sure that they face the direction shown in the illustra-
tion on the bottom of the battery compartment. The positive ends of the three batteries
in the bottom row point towards the bottom of the machine, while the positive ends of
the top three batteries point in the opposite direction.
Attach the back cover by inserting the tab on the bottom end of the cover into the slot
on the bottom end of the machine, then pushing down firmly on the top end of the
cover until it snaps into place.
Be sure to insert the new batteries within five minutes of removing the old ones, oth-
erwise the text shown in the LCD display and any text files stored in the memory will
be lost (unless the machine is plugged into an electrical outlet with the AC adapter).
If alkaline batteries are not used, large fonts and barcodes cannot be printed.
BATTERIES