LS7-38-2 Panduit Corp, LS7-38-2 Datasheet - Page 5

• Manufacturer Part Number: LS7-38-2
• Description: TAPE LAM 3/8"X 26.2' BLK ON CLR
• Manufacturer: Panduit Corp
• Series: PANACEA™r
• Type: Labelr

Specifications of LS7-38-2

• Label Type: Thermal Transfer
• Label Size: 0.375" x 26.2' (9.5mm x 8.0m)
• Rohs Status: Not applicable
• Color: Clear
• Label Material: Polyester
• Background Color: Clear
• Legend: Blank
• Pack Quantity: 1
• Product: LS7 Laminated Adhesive Label Tape
• Features: For flat label applications only
• Length: 314.96 in
• For Use With/related Products: Thermal Transfer Printer
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 298-1342

The LS7 printer was designed specifically to make cable, patch panel, faceplate and facility
marking effortless. This palm-sized printer combines high quality thermal transfer print, fas t
loading tape cassettes and industrial label materials to eliminate concerns about labels falling
off.
This manual will guide you step by step through the set-up, operation, and troubleshooting of
the LS7 Printer. If you have problems not covered herein, contact your local Panduit Sales
Representative or call Panduit Technical Support at 866-871-4571 (outside the US, refer to
page 70 for contact information).
SAFE OPERATION PRACTICES
The following general safety practices supplement the specific warnings and cautions
depicted elsewhere in this manual. They are recommended precautions that must be
understood and applied during the operation and maintenance of this printer.
Do not operate the printer in the presence of flammable gases or fumes. Operation of this
printer in such an environment cons titutes a definite safety hazard.
Do not operate this printer in wet or damp areas. Operation of the printer in such an
environment constitutes a definite safety hazard.
Because of the danger of introducing additional hazards, do not install substitute parts or
perform an unauthorized modification to the printer or its accessories. The proper
components for service and repair may be obtained from Panduit Corp.
When the printer has been in use for an extended period of time, the printer motor may
become hot. DO NOT touch the printer motor with bare hands.
Patent numbers and patent publication numbers which are related to this product are as
follows:
USP5069557, USP5120147
2
Do Not Operate In An Explosive Environment
Do Not Operate In Wet Or Damp Areas
Do Not Substitute Parts Or Modify Equipment
WARNING:
INTRODUCTION AND SAFE OPERATION
USP4839742,
USP4927278,
USP4976558,
USP4983058,
USP5009530,