MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 31
![MODEM V.92 WORLD DATA/FAX LEASE](/photos/1/47/14723/mt5600ba-v92-nam_sml.jpg)
MT5600BA-V92-NAM
Manufacturer Part Number
MT5600BA-V92-NAM
Description
MODEM V.92 WORLD DATA/FAX LEASE
Manufacturer
Multi-Tech Systems
Series
MultiModem® IIr
Specifications of MT5600BA-V92-NAM
Data Format
V.92
Interface
RS-232
Voltage - Supply
9 V ~ 12 V
Mounting Type
Desktop
Package / Case
9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1018
Dial Backup and Leased Line Restore Setup
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
1. Connect a telephone cable to the LINE jack of an MT5600BA-V92 modem set up for leased
2. Turn on the modem.
3. Starting at the STATUS LCD, press the following buttons on the front panel:
4. Press the
5. Press the
6. The number can be up to 30 characters in length. Repeat steps 4 and 5 until the number is
7. Press the Enter button again to go to the DIAL BACKUP NUMBER LCD.
8. To change the default restore time, press
9. Press the
10. Press the
11. Repeat steps 9 and 10 until you have entered a value between 10 and 255, or 0 to disable
12. Press the Enter button to return to the TIME TO RESTORE (S15) LCD.
13. To change the default dial backup time, press
14. Repeat steps 9 and 10 until you have entered a value between 0 and 255, and then press the
15. Press the Enter button again to return to the DIAL BACKUP TIME (S17) LCD.
16. Dial backup and leased line restore setup is complete.
line operation. Connect the other end of the cable to a standard dialup line jack.
number.
Note:
entered, and then press the Enter button to store it. The DIAL BACKUP # STORED LCD
appears.
Note:
then press
dial backup, and then press the Enter button to store it. The TIME STORED LCD appears.
LCD, then press
Enter button to store it. The TIME STORED LCD appears.
Notes:
•
•
,
Registers S15 and S17 can also be changed using the Sr=n AT command. See the AT
Command Reference Guide on the CD that was shipped with your modem.
The dial backup number can be displayed only 16 characters at a time. To see
characters 17–30, press the
go to the next LCD, press the
. The ENTER NUMBER LCD appears.
To backspace or to cancel an entry, press
Steps 8 through 15 are optional.
button to go to the next digit in the number.
button to go to the next digit in the number.
,
or
or
. The ENTER TIME IN MINUTES LCD appears.
,
button several times to select the first digit in the dial backup telephone
button several times to select the first digit in the number.
. The ENTER TIME IN MINUTES LCD appears.
button. To go to the previous LCD, press the
button.
to go to the TIME TO RESTORE (S15) LCD,
to go to the DIAL BACKUP TIME (S17)
several times.
Chapter 4 – Leased Line Operation
,
,
button. To
,
,
31
,